Compact LED system light, lamp, lamp cover, including mounting hardware
Mounting distance screws
450 mm
Connection options
Power supply via connectors, door position switch, through wiring (installation of light rows)
Lamp type
LEDs, cool white
Protection class
III (SELV)
Switch (type)
Integrated on/off/door position switch
Luminaires mounting type
Screwing, clip mounting, magnetic mounting (accessory)
Rated impulse voltage withstand, phase to ground
dependent on power supply
Rated impulse withstand voltage phase to phase
dependent on power supply
Rated insulation voltage
dependent on power supply
Rated current max DC note
When installing rows of luminaires, the maximum rated current is 2 Ampere
At DC
0,12 A
Number of LEDs
30
Mounting spacing clip/magnet
375 mm
Mounting options
Directly on cabinet profile with 25 mm mounting grid, via mounting kit magnet, AE: with rail for indoor installation
Note
Use is intended only in control cabinets and enclosed enclosures. When used with customer-specific power supplies, ensure that these have the required approvals according to the application. When assembling rows of luminaires, the maximum rated current is 2 Ampere.
Width
430 mm
Height
32,8 mm
Depth
20,64 mm
Rated operating voltage
24 V (DC)
Degree of protection IP according to IEC 60 529
IP 20
Lamp cover
Beam angle adjustment
Benefits: Max. EMC capacity.
Safe, thanks to operation in the extra-low safety voltage range.
Economical energy use.
Low-maintenance thanks to the use of LEDs.
May be connected to a door-operated switch.
Function principle: Integral through-wiring.
Universal attachment options.
Vertically hinged light cone
Material: Light body: Extruded aluminium
Light cover: Polycarbonate (halogen-free)
Light ends: PC-ABS
Colour: Similar to RAL 7035
Protection category IP to IEC 60 529: IP 20
Supply includes: LED system light with clip and screw mounting kits
Light
Light cover
Assembly parts
Product modification: From December 2015, the existing LED technology will be replaced with a new generation. The benefit to you: Double the luminous flux compared with the current version.
Note: Only intended for use in enclosures and sealed cases
When using on customer-supplied power packs, it is important to obtain the requisite approvals depending on the application
When configuring rows of lights, the maximum rated current is 2 amperes
Packs of: 1 pc(s).
EAN: 4028177630147
Customs tariff number: 94054099
eCl@ss 5.1: 27189241
eCl@ss 7.0: 27189241
ETIM 6.0: EC000321
Dimensions: Width: 430 mm
Height: 32.8 mm
Depth: 20.64 mm
Rated operating voltage: 24 V (DC)
Voltage tolerance: ± 10 %
Installation options: TS horizontal section of the roof frame: direct
TS, SE vertical section: direct
SE extrusions at the front and rear of the roof frame: direct
SE extrusions at the side of the roof frame: direct
AE, CM, TP: with magnetic attachment
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 375 mm
Mounting distance – screw attachment: 450 mm
Rated current: With DC (max.): 0.12 A
Note: When configuring rows of lights, the maximum rated current is 2 amperes
Equipment (electrical): Light: LEDs, cold white
Protection category: III (SELV)
Connection options: Power supply via connectors
Connection options: Door-operated switch
Connection options: Through-wiring (creating rows of lights)
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation voltage: Depending on the power pack
Rated impulse withstand voltage, phase to earth: Depending on the power pack
Rated impulse withstand voltage, phase to phase: Depending on the power pack
Number of LEDs: 30
Light – installation type: Screw-fastening
Clip attachment
Magnetic attachment (accessory)
Light cover: yes
Light cone adjustment: yes
Weight/pack: 0.38 kg