Rittal 4140810, EAN: 4028177630123

Rittal SZ 4140.810 - SZ LED system light WHD 230x33x21 24 DC Integral on/off/door operated

Industrial Material > Enclosures / Chassis > System Accessories

Rittal SZ 4140.810 - SZ LED system light WHD 230x33x21 24 DC Integral on/off/door operated

Lieske Part No. 358540
Mfg Part No 4140810
EAN-Code 4028177630123
Manufacturer Rittal
Here only 93,50 EUR
111,27 EUR incl. VAT

Further information for Rittal SZ 4140.810 - SZ LED system light WHD 230x33x21 24 DC Integral on/off/door operated

General
Function principleIntegrated through-wiring., Universal mounting options., Pivotable light beam.
MaterialLuminaire body: extruded aluminium, luminaire cover: polycarbonate (halogen-free), luminaire ends: PC-ABS
ColourSimilar to RAL 7035
Scope of deliveryCompact LED system light, lamp, lamp cover, including mounting hardware
Mounting distance screws250 mm
Connection optionsPower supply via connectors, door position switch, through wiring (installation of light rows)
Lamp typeLEDs, cool white
Protection classIII (SELV)
Switch (type)Integrated on/off/door position switch
Luminaires mounting typeScrewing, clip mounting, magnetic mounting (accessory)
Rated impulse voltage withstand, phase to grounddependent on power supply
Rated impulse withstand voltage phase to phasedependent on power supply
Rated insulation voltagedependent on power supply
Rated current max DC noteWhen installing rows of luminaires, the maximum rated current is 2 Ampere
At DC0,04 A
Number of LEDs10
Mounting spacing clip/magnet175 mm
Mounting optionsDirectly on cabinet profile with 25 mm mounting grid, via mounting kit magnet, AE: with rail for indoor installation
NoteUse is intended only in control cabinets and enclosed enclosures. When used with customer-specific power supplies, ensure that these have the required approvals according to the application. When assembling rows of luminaires, the maximum rated current is 2 Ampere.
Width230 mm
Height32,8 mm
Depth20,64 mm
Rated operating voltage24 V (DC)
Degree of protection IP according to IEC 60 529IP 20
Lamp coverJa
Beam angle adjustmentJa
Benefits: Max. EMC capacity.
Safe, thanks to operation in the extra-low safety voltage range.
Economical energy use.
Low-maintenance thanks to the use of LEDs.
May be connected to a door-operated switch.
Function principle: Integral through-wiring.
Universal attachment options.
Vertically hinged light cone
Material: Light body: Extruded aluminium
Light cover: Polycarbonate (halogen-free)
Light ends: PC-ABS
Colour: Similar to RAL 7035
Protection category IP to IEC 60 529: IP 20
Supply includes: LED system light with clip and screw mounting kits
Light
Light cover
Assembly parts
Product modification: From December 2015, the existing LED technology will be replaced with a new generation. The benefit to you: Double the luminous flux compared with the current version.
Note: Only intended for use in enclosures and sealed cases
When using on customer-supplied power packs, it is important to obtain the requisite approvals depending on the application
When configuring rows of lights, the maximum rated current is 2 amperes
Packs of: 1 pc(s).
EAN: 4028177630123
Customs tariff number: 94054099
eCl@ss 5.1: 27189241
eCl@ss 7.0: 27189241
ETIM 6.0: EC000321

Dimensions: Width: 230 mm
Height: 32.8 mm
Depth: 20.64 mm
Rated operating voltage: 24 V (DC)
Voltage tolerance: ± 10 %
Installation options: TS horizontal section of the roof frame: direct
TS, SE vertical section: direct
SE extrusions at the front and rear of the roof frame: direct
SE extrusions at the side of the roof frame: direct
AE, CM, TP: with magnetic attachment
AE: with rail for interior installation
Mounting dimensions: Mounting distance – clip/magnet: 175 mm
Mounting distance – screw attachment: 250 mm
Rated current: With DC (max.): 0.04 A
Note: When configuring rows of lights, the maximum rated current is 2 amperes
Equipment (electrical): Light: LEDs, cold white
Protection category: III (SELV)
Connection options: Power supply via connectors
Connection options: Door-operated switch
Connection options: Through-wiring (creating rows of lights)
Switch (type): Integral, on/off/door-operated switch mode
Rated insulation voltage: Depending on the power pack
Rated impulse withstand voltage, phase to earth: Depending on the power pack
Rated impulse withstand voltage, phase to phase: Depending on the power pack
Number of LEDs: 10
Light – installation type: Screw-fastening
Clip attachment
Magnetic attachment (accessory)
Light cover: yes
Light cone adjustment: yes
Weight/pack: 0.24 kg
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/358540
qrcode für Rittal SZ 4140.810 - SZ LED system light WHD 230x33x21 24 DC Integral on/off/door operated