| General |
| Material | Aluminium, copper |
| Rated current max. | 328 A |
| Note | The rated current is determined at 65 °C busbar temperature and 35 °C ambient temperature, correction factor diagram according to DIN EN 43 671, individually cuttable |
| Standards | DIN EN 13 601 |
| Cross section | 30 mm x 5 mm |
| Length | 2.400 mm |
| Copper content (kg/piece) | 0,52 |
The Rittal SV 3584020 is a
busbar from the CUPONAL series, designed for use in industrial switchgear and power distribution systems. It is made of
aluminium, coated with a
copper cladding to ensure optimal electrical conductivity and corrosion protection. The busbar has a cross-section of 30 mm x 5 mm and a length of 2,400 mm. It is specifically intended for use with busbar holders 9340.000 and 9340.050, enabling secure mounting in enclosures and distributors.
Applications
The busbar is used in industrial electrical engineering where reliable power distribution over long distances is required. It is suitable for installations in manufacturing, power supply, and automation technology. The combination of aluminium and copper ensures good heat dissipation and mechanical stability, which is particularly advantageous in environments with high thermal loads.
Functions and Equipment in Detail
The busbar is
individually cuttable, allowing it to be adapted to the specific requirements of the installation. This enables flexible use in different enclosure sizes and configurations. The
rated current is up to 328 A, determined under conditions of a busbar temperature of 65 °C and an ambient temperature of 35 °C. The current-carrying capacity can be adjusted using the correction factor diagram according to DIN EN 43 671 for other operating conditions.
Technology Explained Simply
The use of
copper-clad aluminium offers a compromise between the low weight of aluminium and the high electrical conductivity of copper. The copper cladding improves contact quality and reduces the risk of oxidation at connection points. The standard
DIN EN 13 601 specifies the requirements for the manufacture and testing of busbars, ensuring the product's quality and safety.
Compatibility and Accessories
The busbar is specifically designed for use with busbar holders 9340.000 and 9340.050. Suitable accessories include the
busbar cover profile for E-Cu 12x5 to 30x10, which can be used to shield and protect the busbars from mechanical stress and contamination. Combining it with this cover profile enables proper and safe installation in enclosures.
Mounting and Installation
Mounting is done using the specified holders, which securely fix the busbar in the enclosure. The individual cuttability allows precise adaptation to the respective enclosure depth. The busbar is delivered in a packaging unit of 6 pieces, with a net weight per package of 8.52 kg. Mounting does not require special tools, although the use of appropriate cutting tools for shortening is necessary.
Advantages in Operation
The combination of aluminium and copper provides high mechanical strength and good electrical properties. The individual cuttability increases flexibility in planning and installation. Compliance with the DIN EN 13 601 standard ensures safe and reliable operation. The busbar is designed for use in industrial environments where high loads and long service life are required.