| General |
| Model | wall mounting, EC |
| Material | Plastic |
| Colour | RAL 9005 |
| Scope of delivery | Complete ready-to-install unit, including pleated filter |
| Fan | diagonal, EC motor |
| Airflow free blowing (with pleated filter) | At 50 Hz: 1,161 m³/h, At 60 Hz: 1,161 m³/h |
| Airflow with associated exhaust filter including pleated filter | At 50 Hz: 969 m³/h |
| Airflow free-blowing (with filter) | At 50 Hz: 931 m³/h |
| Airflow with associated exhaust filter including felt filter | At 50 Hz: 728 m³/h |
| Rated operating voltage | 200 V - 240 V, 1~, 50 Hz/60 Hz |
| Rated power Pel | At 50 Hz: 173.5 W |
| Rated current max. | At 50 Hz: 1.38 A |
| Width | 323 mm |
| Height | 323 mm |
| Depth | 161 mm |
| Built-in depth | 141 mm |
| Mounting cutout | Cutout width: 292 mm, Cutout height: 292 mm |
| Degree of protection IP according to IEC 60 529 | IP 51 with non-woven filter/pleated filter, IP 52 with pleated filter and absorber mat, IP 56 with non-woven filter/pleated filter and spray hood |
| NEMA degree of protection | Type 1, 12 with felt filter/pleated filter, Type 3, 3R with felt filter/pleated filter and spray water hood |
| Fuse | Circuit breaker/fuse: 6 A |
| Operating temperature range | -25 °C...55 °C |
| Storage temperature range | -25 °C...70 °C |
| Sound pressure level | At 50 Hz: 72 dB(A) |
| Interfaces | 0 - 10 V/PWM input, speed output, potential-free fault alarm contact, RS485 (ModBus) |
The Rittal SK 3245.908 is a
filter fan with
EC technology, specifically designed for climate control in enclosures. It serves for controlled ventilation and cooling of electronic components in industrial environments, with the integrated filter function keeping dust and particles out of the incoming air. The device is designed for
wall mounting and is made of
plastic in the colour
RAL 9005.
Applications
This filter fan is suitable for use in industrial enclosures where continuous cooling and simultaneous filtration of incoming air are required. It is particularly suitable for installations in production environments where dust, fine particles, or other contaminants could affect electronics. The integrated filter technology ensures that the air entering the enclosure is cleaned, extending the service life of installed components. The
protection rating IP 51 with fleece or pleated filter, and
IP 56 when used with a spray water hood, makes it suitable for locations with increased contamination risk or spray water exposure. The corresponding
NEMA protection ratings Type 1, 12 and Type 3, 3R highlight its suitability for industrial applications.
Functions and equipment in detail
The fan operates with a
diagonal fan and an
EC motor, which ensures high energy efficiency and low operating noise. The air performance is
1,161 m³/h free blowing at 50 Hz and 60 Hz, while the performance drops to
969 m³/h when an outlet filter is used. With a fleece filter, the free blowing air performance is
931 m³/h, and with an outlet filter, it is
728 m³/h. The
rated operating voltage is
200 V – 240 V, 1~, 50 Hz/60 Hz, enabling universal use in various power networks. The
rated power is
173.5 W at 50 Hz, with a
maximum rated current of 1.38 A. The
operating temperature range extends from
-25 °C to 55 °C, allowing use in environments with varying climatic conditions.
Technology explained simply
The
EC technology (External Commutator) enables precise speed control and higher energy efficiency compared to conventional fans. The
diagonal fan technology ensures higher pressure stability, resulting in more uniform and consistent air circulation within the enclosure. The integrated
ModBus interface (RS485) allows for control and monitoring of the device, enabling functions such as automatic filter cleaning, filter maintenance indication, or emergency cooling. Additionally, the fan features a
0–10 V/PWM input, a
speed output, and a
potential-free fault alarm contact, allowing flexible integration into existing control systems. The
sound pressure level is 72 dB(A) at 50 Hz, which is acceptable for industrial applications.
Compatibility and accessories
The filter fan is compatible with various accessories that extend its functionality. These include
outlet filters in RAL 9005,
EC speed controller sensor,
thermostats,
digital temperature display and control,
replacement filter mats (5 or 50 pieces),
SK ModBus adapter,
hygrostat,
spray water hood for increased protection rating,
blanking plates,
pleated filters IP55/IP54,
absorber mats, and an
IoT interface. These components allow individual adaptation to specific requirements such as air purification, temperature control, or network integration.
Mounting and installation
Mounting is tool-free and accelerated by optimised snap hooks. The mounting cutout measures
292 mm (width) × 292 mm (height), with an installation depth of
141 mm. The device dimensions are
323 mm (width) × 323 mm (height) × 161 mm (depth). The
tool-free mounting and the
new opening mechanism on the louver grille facilitate filter replacement and reduce maintenance time.
Operational advantages
The use of the Rittal SK 3245.908 provides high air performance due to the standard-integrated pleated filter, ensuring efficient cooling. The EC technology ensures lower energy consumption and longer service life. The ModBus interface enables intelligent control and monitoring, simplifying maintenance and increasing operational reliability. The high protection rating and availability of additional components make the device flexible for various industrial scenarios.