| General |
| Model | wall mounting, EC |
| Material | Plastic |
| Colour | RAL 7035 |
| Scope of delivery | Complete ready-to-install unit, including pleated filter |
| Fan | diagonal, EC motor |
| Airflow free blowing (with pleated filter) | At 50 Hz: 867 m³/h, At 60 Hz: 867 m³/h |
| Airflow with associated exhaust filter including pleated filter | At 50 Hz: 715 m³/h |
| Airflow free-blowing (with filter) | At 50 Hz: 700 m³/h |
| Airflow with associated exhaust filter including felt filter | At 50 Hz: 535 m³/h |
| Rated operating voltage | 100 V - 240 V, 1~, 50 Hz/60 Hz |
| Rated power Pel | At 50 Hz: 116.4 W |
| Rated current max. | At 50 Hz: 1.97 A |
| Width | 323 mm |
| Height | 323 mm |
| Depth | 161 mm |
| Built-in depth | 141 mm |
| Mounting cutout | Cutout width: 292 mm, Cutout height: 292 mm |
| Degree of protection IP according to IEC 60 529 | IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood |
| NEMA degree of protection | Type 12 with felt filter/pleated filter, Type 3, 3R, 4, 4X with felt filter/pleated filter and spray water hood |
| Fuse | Circuit breaker/fuse: 6 A |
| Operating temperature range | -25 °C...55 °C |
| Storage temperature range | -25 °C...70 °C |
| Sound pressure level | At 50 Hz: 66 dB(A) |
| Interfaces | 0 - 10 V/PWM input, speed output, potential-free fault alarm contact, RS485 (ModBus) |
The Rittal SK 3244.900 is a
filter fan with
EC technology, designed for
enclosure climate control. It serves for controlled ventilation of enclosures, regulating internal temperature and extending the service life of installed electronic components. The unit is designed for
wall mounting and is directly installed into a pre-cut mounting opening in the enclosure. The housing is made of
plastic and is finished in
RAL 7035, enabling visual harmonization with standard enclosure fronts. The delivery includes a
fully ready-to-install unit including pleated filter, so the fan is operational immediately after installation.
Applications
The filter fan is designed for use in industrial environments where continuous and reliable cooling of enclosures is required. It is particularly suitable for applications in manufacturing, energy supply, transport infrastructure, and automation technology. The integrated filter technology ensures that dust, particles, and other contaminants are filtered from the incoming air, maintaining cleanliness inside the enclosure. The
protection rating IP 54 (with nonwoven or pleated filter) provides protection against dust and splashing water, while upgrading to
IP 55 (with pleated filter and absorber mat) or
IP 56 (with spray water hood) offers additional protection against spray water. According to NEMA standards, the unit corresponds to
Type 12 (with nonwoven or pleated filter) and
Type 3, 3R, 4, 4X (with spray water hood), enabling worldwide use in various environments.
Functions and Equipment in Detail
The fan features a
diagonal fan with EC motor, ensuring high pressure stability and providing more uniform, consistent ventilation of the enclosure. The air performance is
867 m³/h free blowing at 50 Hz and 60 Hz, decreasing to
715 m³/h when an outlet filter is used. With a nonwoven filter, the free blowing air performance drops to
700 m³/h, and with an outlet filter, it reduces to
535 m³/h. The
rated operating voltage is in the wide range of
100 V to 240 V, 1~, 50 Hz/60 Hz, enabling worldwide use. The
rated power is
116.4 W at 50 Hz, and the
rated current is max.
1.97 A. The
operating temperature ranges from
-25 °C to 55 °C, and the
storage temperature from
-25 °C to 70 °C. The
sound pressure level is
66 dB(A) at 50 Hz, representing an acoustically acceptable operating noise level.
Technology Explained Simply
The
EC technology (External Commutator) enables energy-efficient and precise speed control of the fan. Unlike conventional motors, the speed is electronically regulated rather than mechanically, resulting in higher efficiency and longer service life. The integrated
ModBus interface (RS485) allows remote control and monitoring of the fan via a network. This enables functions such as
automatic filter cleaning,
filter maintenance indication, and
emergency cooling function, which activates in case of faults or filter contamination. Additionally, the fan features a
0-10 V/PWM input for speed control, a
speed output, and a
potential-free fault alarm contact that signals errors or failures.
Tool-free mounting is achieved via optimized snap hooks, enabling faster installation on the enclosure. A new opening mechanism on the louver grille simplifies filter replacement.
Compatibility and Accessories
The fan is compatible with various accessories that extend its functionality. These include
outlet filters in RAL 7035,
EC speed controller sensor,
thermostat for internal temperature control,
replacement filter mats (5 or 50 pieces),
digital temperature display and control,
SK ModBus adapter,
hygrostat,
spray water hood made of stainless steel,
blind cover for mounting opening,
pleated filter IP54/IP55,
absorber mat IP55, and an
IoT interface. These components can be added as required to optimize protection rating, control, or monitoring functions.
Mounting and Installation
Installation is done by fitting into a pre-cut mounting opening with dimensions
292 mm (width) x 292 mm (height). The installation depth is
141 mm, and the overall dimensions of the unit are
323 mm (width) x 323 mm (height) x 161 mm (depth). Tool-free mounting via snap hooks reduces installation time and simplifies maintenance. The unit is designed for use in enclosures that feature a corresponding mounting opening.
Operational Advantages
The Rittal SK 3244.900 offers high air performance due to the standard use of pleated filters, ensuring efficient cooling. The EC technology ensures low energy consumption and long service life. The ModBus interface enables integrated monitoring and control, simplifying maintenance and increasing operational reliability. Tool-free mounting and easy filter replacement reduce maintenance time. The worldwide usability due to the wide voltage input (100–240 V) makes the fan suitable for international projects. The integrated filter technology protects the enclosure interior from contamination, increasing the reliability of installed devices.