| General |
| Model | Wall surface mounted |
| Material | Plastic |
| Colour | RAL 9005 |
| Scope of delivery | Outlet filter, pleated filter |
| Mounting cutout | Cutout width: 292 mm, Cutout height: 292 mm |
| Suitable for part no. | SK 3243.7xx/3243.9xx/3244.7xx/3244.9xx/3245.9xx |
| Width | 323 mm |
| Height | 323 mm |
| Depth | 44,7 mm |
| NEMA degree of protection | Type 12 with felt filter/pleated filter, Type 3, 3R, 4, 4X with felt filter/pleated filter and spray water hood |
| Degree of protection IP according to IEC 60 529 | IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood |
The Rittal SK 3243.308 is an
outlet filter for filter fans of the SK 3243.7xx, 3243.9xx, 3244.7xx, 3244.9xx and 3245.9xx series. It serves air purification in the exhaust area of enclosures and ensures continuous filtration, protecting indoor air from dust particles. The unit is designed for
wall mounting and is made of
plastic in the colour
RAL 9005. Dimensions are 323 mm width and 323 mm height, with the mounting cutout requiring a clearance of 292 mm width and 292 mm height. The filter depth is 44.7 mm.
Applications
The outlet filter is used in industrial environments where controlled airflow and protection against contamination are required. It is specifically designed for enclosures equipped with filter fans to regulate internal temperature while maintaining air quality. Typical applications include production plants, machine controls, or environments with high dust exposure.
Functions and Equipment in Detail
The filter features an
opening mechanism on the louver grille, simplifying filter replacement. Mounting to the enclosure is tool-free and enabled by optimised snap hooks, ensuring quick and secure installation. The delivery includes the
outlet filter and a
pleated filter. This combination ensures efficient particle separation and supports air purification within the enclosure.
Technology Explained Simply
The filtration technology is based on a pleated filter, which provides a large filter surface in a compact design. This increases filtration performance and extends the filter’s service life. Protection rating IP 54 is achieved when the filter is used with a non-woven or pleated filter. When used with a pleated filter and an absorber mat, the protection rating increases to IP 55. With an additional spray water hood, the filter reaches IP 56. NEMA protection ratings include Type 12 with non-woven or pleated filter, and Type 3, 3R, 4, and 4X when the filter is used with non-woven or pleated filter and spray water hood. These protection ratings are suitable for use in humid, dusty, or splash-water environments.
Compatibility and Accessories
The outlet filter is specifically designed for filter fan models SK 3243.7xx, 3243.9xx, 3244.7xx, 3244.9xx and 3245.9xx. As accessories, replacement filter mats (available in packs of 5 or 50) are available to maintain filtration performance. A
spray water hood made of stainless steel increases the protection rating and is suitable for use in wet environments. A
blind cover for the mounting cutout is also available if the filter is not installed. Additionally, special
pleated filters for IP54 and IP55 and an
absorber mat for IP55 are available to further enhance filtration performance and protection rating.
Mounting and Installation
Installation is tool-free at the designated location in the enclosure. The snap hooks allow for quick and secure fastening. The mounting cutout of 292 mm × 292 mm must be provided in the enclosure. Installation is performed after removing the old filter, inserting the new filter into the holder and locking it in place.
Operational Advantages
The filter offers easy maintenance through tool-free replacement and the integrated opening mechanism. The combination of pleated filter and absorber mat enables a higher protection rating, expanding application possibilities in demanding environments. Using replacement filters ensures continuous air purification and extends the service life of the entire ventilation system. The RAL 9005 colour matches standard enclosure colours aesthetically.