| General |
| Material | ABS |
| Colour | RAL 9005 |
| Scope of delivery | exhaust filter, non-woven filter mat |
| Mounting cutout | Cutout width: 224 mm, cutout height: 224 mm |
| Suitable for part no. | 3240.1xx/3240.5xx/3241.1xx/3241.5xx |
| Width | 255 mm |
| Height | 255 mm |
| Depth | 25 mm |
| NEMA degree of protection | Type 12 with felt filter/pleated filter, Type 3, Type 3R, Type 4, Type 4X with felt filter/pleated filter and spray hood |
| Degree of protection IP according to IEC 60 529 | IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood |
The SK 3240208 from Rittal is an
outlet filter for convective ventilation of enclosures. It is mounted in the upper or lower section of the enclosure to enable controlled air exhaust, while simultaneously retaining dust and foreign particles. The device is made of
ABS and is available in the colour
RAL 9005 (black). Dimensions are 255 mm width, 255 mm height, and 25 mm depth, with the mounting cutout requiring a clearance of 224 mm width and 224 mm height. The filter is specifically designed for enclosure models from the series 3240.1xx, 3240.5xx, 3241.1xx, and 3241.5xx.
Applications
The outlet filter serves passive ventilation of enclosures, where air circulates through natural convection. It is suitable for applications requiring continuous air circulation without the use of additional fans or active ventilators. Installation in the upper or lower section of the enclosure enables efficient heat dissipation from inside the housing. The filtering function protects electronic components from dust and particles, extending the service life of the devices.
Functions and equipment in detail
The product is supplied with an
outlet filter and a
non-woven filter mat. The non-woven filter mat serves as the primary protective layer against dust and coarse particles. The filter itself is made of
ABS, a robust plastic that withstands mechanical stress and environmental influences. The colour
RAL 9005 ensures visual harmony with other components in the enclosure. Dimensions of 255 mm × 255 mm × 25 mm allow for standardised installation in the designated enclosure models.
Technology explained simply
Ventilation occurs through convection, i.e., natural air circulation caused by temperature differences within the enclosure. Hot air rises and is discharged through the outlet filter, while cool air flows in through other openings (e.g., inlet filters). The filter retains dust and particles, maintaining internal cleanliness. Protection rating IP 54 is achieved when the filter is equipped with a non-woven or pleated filter. Using a pleated filter and an absorber mat increases the protection rating to IP 55. With a non-woven or pleated filter and a spray hood, a protection rating of IP 56 is possible. NEMA protection ratings include Type 3, 3R, 4, 4X, and Type 12, with higher ratings achieved by adding components such as the spray hood.
Compatibility and accessories
The outlet filter is specifically designed for enclosure models with article numbers 3240.1xx, 3240.5xx, 3241.1xx, and 3241.5xx. As suitable accessories, the
Blue e+ outlet filter, RAL 9005 is offered, representing an alternative version. Combining it with a pleated filter and an absorber mat enables a higher protection rating according to IP 55. Using a spray hood in conjunction with the non-woven or pleated filter meets the requirements of protection rating IP 56.
Installation and mounting
Mounting is done by inserting into a pre-defined mounting cutout with dimensions of 224 mm width and 224 mm height. The filter is inserted into the enclosure and secured, with the exact mounting instructions corresponding to the respective enclosure model. Installation requires no additional tools or components, as the filter fits directly into the designated cutout. Positioning in the upper or lower section of the enclosure depends on ventilation requirements.
Operational advantages
Using the outlet filter enables reliable, low-maintenance ventilation without additional energy consumers. The integrated filtering function protects electronic components from contamination, increasing operational safety. Protection ratings from IP 54 to IP 56, along with NEMA classification Type 3 to Type 4X, make the filter suitable for a wide range of industrial environments, including areas with high dust exposure or splashing water. The use of ABS as material ensures high mechanical stability and weather resistance.