| General |
| Model | Wall surface mounted |
| Material | Plastic |
| Colour | RAL 7035 |
| Scope of delivery | Complete ready-to-install unit, including pleated filter |
| Fan | Axial, split-pole motor |
| Airflow free blowing (with pleated filter) | At 50 Hz: 63 m³/h, At 60 Hz: 72 m³/h |
| Airflow with associated exhaust filter including pleated filter | At 50 Hz: 49 m³/h, at 60 Hz: 55 m³/h |
| Airflow free-blowing (with filter) | At 50 Hz: 53 m³/h, At 60 Hz: 64 m³/h |
| Airflow with associated exhaust filter including felt filter | At 50 Hz: 40 m³/h, At 60 Hz: 46 m³/h |
| Rated operating voltage | 115 V, 1~, 50 Hz/60 Hz |
| Rated power Pel | At 50 Hz: 15.4 W, at 60 Hz: 15.8 W |
| Rated current max. | At 50 Hz: 0.2 A, At 60 Hz: 0.21 A |
| Width | 148,5 mm |
| Height | 148,5 mm |
| Depth | 82,5 mm |
| Built-in depth | 64 mm |
| Mounting cutout | Cutout width: 124 mm, cutout height: 124 mm |
| Degree of protection IP according to IEC 60 529 | IP 54 with nonwoven filter/pleated filter, IP 55 with pleated filter and absorber mat, IP 56 with nonwoven filter/pleated filter and spray water hood |
| NEMA degree of protection | Type 12 with felt filter/pleated filter, Type 3, 3R, 4, 4X with felt filter/pleated filter and spray water hood |
| Fuse | Circuit breaker/fuse: 2 A |
| Note | For the filter fan 3237.XXX, the electrical connection is made via 2 individual wires (approx. 300 mm length) on the device; for all other filter fans, via spring clamp terminal. |
| Operating temperature range | -15 °C...55 °C |
| Storage temperature range | -30 °C...70 °C |
| Sound pressure level | At 50 Hz: 52 dB(A), At 60 Hz: 54 dB(A) |
The Rittal SK 3238.710 is a
filter fan for
enclosure climate control, designed for
wall mounting in industrial applications. The device provides controlled ventilation of enclosures to regulate internal temperature and extend the service life of installed electronic components. It is delivered as a
fully ready-to-install unit, including a
pleated filter, and enables
tool-free installation via optimized snap hooks. The
diagonal fan technology ensures higher pressure stability and more uniform, consistent air circulation within the enclosure, resulting in more efficient cooling of electronic components.
Applications
The filter fan is designed for use in industrial environments where continuous cooling of enclosures is required. It is particularly suitable for applications in manufacturing, automation technology, or power supply, where electronic devices must be protected from overheating. The
protection rating IP 54 (with felt filter/pleated filter) provides protection against dust and splashing water, making it suitable for many indoor and outdoor applications. With additional components such as an absorber mat or spray water hood, the protection rating can be increased to IP 55 or IP 56, expanding its use in humid or dusty environments.
Functions and Equipment in Detail
The fan features an
axial fan with split-pole motor, ensuring quiet and reliable operation. The air performance is
63 m³/h at 50 Hz and
72 m³/h at 60 Hz when free blowing, with actual performance varying depending on filter type and connection conditions. When using an outlet filter, the air performance drops to
49 m³/h (50 Hz) or
55 m³/h (60 Hz). The
rated operating voltage is
115 V, 1~, 50 Hz/60 Hz, making it suitable for standard mains voltages in many countries. The rated power is
15.4 W (50 Hz) and
15.8 W (60 Hz), with a maximum rated current of
0.2 A (50 Hz) or
0.21 A (60 Hz). The
fuse is rated at
2 A to protect the fan from overloads.
Technology Explained Simply
The
diagonal fan technology ensures that air flows diagonally rather than vertically from the device. This results in more even air distribution within the enclosure and prevents local overheating. The integrated
pleated filter included in the delivery filters particles from ambient air, cleaning the internal air in the enclosure. Filter replacement is simplified by a new opening mechanism on the louver grille. The
sound pressure level is
52 dB(A) (50 Hz) and
54 dB(A) (60 Hz), which is acceptable for industrial environments. The
operating temperature range is from
-15 °C to 55 °C, enabling use in regions with varying climates.
Compatibility and Accessories
The filter fan can be combined with various accessories to extend protection rating or functionality. These include
outlet filters in RAL 7035,
replacement filter mats in various versions, a
spray water hood for increased protection rating IP 56, an
absorber mat for IP 55, and
speed controllers for finer control of airflow.
Thermostats and
hygrostats can also be used for temperature and humidity control within the enclosure. Installation is done via a
mounting cutout of 124 mm (W) x 124 mm (H), with an installation depth of
64 mm. The device dimensions are
148.5 mm (W) x 148.5 mm (H) x 82.5 mm (D).
Installation and Mounting
Mounting is tool-free via integrated snap hooks, allowing quick and secure attachment to the enclosure. Electrical connection is made via
spring-loaded terminals, enabling easy connection to the network. The unit is delivered as a
fully ready-to-install unit, including the pleated filter, so no additional components are required for basic operation.
Operational Advantages
The Rittal SK 3238.710 provides a reliable and maintenance-friendly climate control solution for enclosures. The
maximum air performance is achieved in the delivered state with the integrated pleated filter. The
tool-free mounting and
easy filter replacement reduce maintenance time. The
diagonal fan technology ensures even air distribution, increasing cooling efficiency. The
protection rating IP 54 offers sufficient protection for many industrial applications, with the option to increase protection rating further using additional components. The
operating temperature range of -15 °C to 55 °C allows use in a wide variety of environments.