| General |
| Model | for filter fans/exhaust filters |
| Material | Folding filter: base polyester, meltblown polycarbonate, absorber mat: 100 % polyester |
| Colour | White |
| Note | Not suitable for use in EMC filter fans. |
| Suitable for part no. | 3238.3xx, 3238.7xx |
| Width | 114 mm |
| Height | 114 mm |
| Depth | 14 mm |
| Absorber mat dimensions | Width: 120 mm, height: 120 mm, depth: 2.9 mm |
| Degree of protection IP according to IEC 60 529 | IP 55 when mounted in filter fan/exhaust filter |
The Rittal SK 3238025 is a
pleated filter for filter fans and outlet filters, specifically designed for use in enclosure climate control systems. It serves for air purification and dust separation during operation of fans with article numbers 3238.3xx and 3238.7xx. The filter unit is finished in white and features a compact design with dimensions 114 mm (width) × 114 mm (height) × 14 mm (depth). The integrated absorber mat measures 120 mm (width) × 120 mm (height) × 2.9 mm (depth) and is made of 100 % polyester. The filter itself consists of a polyester base fabric and a meltblown polycarbonate layer, enabling high filtration performance with low air resistance.
Applications
The filter is intended for use in filter fans and outlet filters, particularly in combination with Rittal models 3238.3xx and 3238.7xx. It is used in enclosures and technical equipment to improve air quality inside and reduce contamination of electronic components by dust and particles. The application is in industrial environments where continuous air purification is required to extend device lifespan and prolong maintenance intervals.
Functions and Equipment in Detail
The
pleated filter technology enables significantly higher airflow compared to conventional nonwoven filters, increasing fan performance and reducing energy consumption. The improved filtration effect reduces dust loading inside the enclosure, enhancing the reliability of installed electronics. The longer service life of the filter reduces maintenance costs, as fewer replacement operations are required. The absorber mat made of 100 % polyester contributes to additional particle separation and supports filtration performance.
Technology Explained Simply
The filter operates on the principle of mechanical separation, where the pleated structure provides a large filtration surface in a compact design. The combination of polyester base and meltblown polycarbonate ensures high particle separation, especially for fine dust particles. The protection rating
IP 55 according to IEC 60 529 is achieved when mounted in a filter fan or outlet filter, meaning the filter is protected against dust and splashing water. This makes it suitable for use in industrial environments where some humidity or dust exposure is present.
Compatibility and Accessories
The filter is specifically designed for Rittal filter fans and outlet filters with article numbers 3238.3xx and 3238.7xx. It is not suitable for use in EMC filter fans, as these require special electrical shielding incompatible with this filter. The packaging unit contains 5 pieces, sufficient for replacement during regular maintenance cycles.
Installation and Mounting
Mounting is done directly into the designated filter holders of compatible fan models. No additional tools or mounting aids are required. The filter unit is simply inserted into the holder and secured by form fit. Installation is performed without additional fastening elements.
Operational Advantages
Thanks to the
pleated filter technology, airflow is increased, improving the cooling performance of the fans and reducing energy consumption. The longer service life reduces maintenance frequency and lowers operating costs. The high filtration performance ensures clean air inside the enclosure, extending the lifespan of electronic components. The IP 55 protection rating ensures reliable operation in industrial environments with dust and moisture exposure.