| General |
| Model | Wall surface mounted |
| Material | Plastic |
| Colour | RAL 7035 |
| Scope of delivery | Complete ready-to-install unit, including felt filter mat |
| Fan | Axial, DC motor |
| Airflow free-blowing (with filter) | For DC: 20 m³/h |
| Airflow with associated exhaust filter including felt filter | For DC: 15 m³/h |
| Rated operating voltage | 24 V (DC) |
| Rated power Pel | At DC: 1.4 W |
| Rated current max. | At DC: 0.06 A |
| Width | 116,5 mm |
| Height | 116,5 mm |
| Depth | 64,5 mm |
| Built-in depth | 46 mm |
| Mounting cutout | Cutout width: 92 mm, cutout height: 92 mm |
| Degree of protection IP according to IEC 60 529 | IP 54 with felt filter, IP 56 with felt filter and spray hood |
| NEMA degree of protection | Type 12 with felt filter, Type 3, 3R with felt filter and spray water hood |
| Fuse | Circuit breaker/fuse: 2 A |
| Note | For the filter fan 3237.XXX, the electrical connection is made via 2 individual wires (approx. 300 mm length) on the device; for all other filter fans, via spring clamp terminal. |
| Operating temperature range | -15 °C...55 °C |
| Storage temperature range | -30 °C...70 °C |
| Sound pressure level | At DC: 42 dB(A) |
The Rittal SK 3237.724 is a
filter fan for
enclosure climate control, designed as a
wall-mounted unit. It serves for controlled ventilation of enclosures to regulate internal temperature and support cooling of electronic components. The device is made of
plastic and available in the colour
RAL 7035. It features
diagonal fan technology, ensuring higher pressure stability and more consistent airflow. The diagonal exhaust direction provides more even cooling of the enclosure. The unit is
fully ready for installation and includes a
non-woven filter mat. Electrical connection is made via
two individual wires with a length of approximately 300 mm at the device.
Applications
The filter fan is designed for use in industrial environments where continuous and reliable ventilation of enclosures is required. It is particularly suitable for systems where temperature control is critical for the functionality of electronic components. The
protection rating IP 54 (with non-woven filter) and
IP 56 (with non-woven filter and spray water hood) allow use in environments with dust and splashing water. The corresponding
NEMA protection ratings Type 12 (with non-woven filter) and
Type 3, 3R (with non-woven filter and spray water hood) extend the range of applications in industrial systems with higher environmental requirements.
Functions and Equipment in Detail
The fan operates with an
axial fan and a
DC motor. The airflow rate is
20 m³/h free blowing (with non-woven filter) and
15 m³/h when used with a matching outlet filter including non-woven filter. The
rated operating voltage is
24 V (DC), the
rated power is
1.4 W, and the
maximum rated current is
0.06 A. The
operating temperature range is from
-15 °C to 55 °C, while the
storage temperature range is from
-30 °C to 70 °C. The
sound pressure level is
42 dB(A), indicating low operating noise. The
installation depth is
46 mm, and the
mounting cutout has a cutout width and height of
92 mm each.
Technology Explained Simply
The diagonal fan technology ensures more uniform and consistent airflow within the enclosure due to higher pressure stability. The air exits diagonally, enabling better air distribution inside the enclosure and thus more efficient cooling of electronic components.
Tool-free installation is achieved via optimised snap hooks, allowing faster and easier mounting on the enclosure. Filter replacement is simplified by a new opening mechanism on the louver grille.
Compatibility and Accessories
Various accessories are available for this filter fan to extend its functionality. These include a
Blue e+ outlet filter in RAL 7035, a
thermostat for internal temperature control, a
digital temperature display and control for 100–230 V, a
spray water hood made of stainless steel, a
blanking cover for the mounting cutout, and a
non-woven filter mat specifically for the filter fan series SK 3237.7xx/32. A
hygrostat can also be combined to monitor humidity levels inside the enclosure.
Installation and Mounting
Installation is tool-free on the enclosure wall. The unit is inserted into the designated mounting cutout (92 mm x 92 mm) and secured using snap hooks. The installation depth of 46 mm must be considered in the enclosure. Electrical connection is made via the two individual wires on the device. A fuse with a rated current of
2 A is required.
Operational Advantages
The filter fan provides reliable and quiet ventilation with low energy consumption. The integrated non-woven filter mat ensures effective particle filtration, reducing contamination of electronic components inside the enclosure. Tool-free installation and easy filter replacement enhance serviceability. The high pressure stability of the diagonal fan technology ensures consistent airflow, even under demanding conditions.