| General |
| Model | for filter fans/exhaust filters |
| Material | Folding filter: base polyester, meltblown polycarbonate, absorber mat: 100 % polyester |
| Colour | White |
| Note | The performance data, degree of protection and approvals of the devices are only guaranteed in combination with original Rittal filter mats. |
| Suitable for part no. | 3240.3xx, 3240.7xx, 3240.900, 3241.7xx, 3241.900 |
| Width | 212,5 mm |
| Height | 212,5 mm |
| Depth | 21 mm |
| Absorber mat dimensions | width: 221 mm, height: 221 mm, depth: 2.9 mm |
| Degree of protection IP according to IEC 60 529 | IP 55 when mounted in filter fan/exhaust filter |
| Note on part number | Not suitable for use in EMC filter fans. |
The article SK 3182125 from Rittal is a
pleated filter for use in
filter fans and
outlet filters. It serves air purification in enclosures and similar technical units by filtering dust, particles, and other contaminants from the incoming air. The filter mat is specifically designed for use with Rittal filter fans with article numbers 3240.3xx, 3240.7xx, 3240.900, 3241.7xx, and 3241.900. Dimensions are 212.5 mm (width) × 212.5 mm (height) × 21 mm (depth), with the absorber mat measuring 221 mm × 221 mm × 2.9 mm. The filter colour is white.
Applications
The filter is intended for use in industrial and technical installations, particularly in enclosures where continuous air circulation and purification are required. It is used in combination with filter fans to ensure air quality inside enclosures and extend the service life of electronic components. The filter technology is not suitable for EMC filter fans, as these require special electrical shielding incompatible with this filter type.
Functions and Equipment in Detail
The
pleated filter consists of a polyester base with a meltblown polycarbonate coating, enabling high filtration efficiency at low air resistance. The integrated
absorber mat made of 100 % polyester provides additional particle separation. The
pleated structure increases the filter surface area compared to flat nonwoven filters, resulting in higher airflow and improved performance of the fan unit. This reduces energy consumption and extends maintenance intervals, lowering operating costs.
Technology Explained Simply
The
pleated filter technology offers significantly higher airflow compared to conventional nonwoven filters, as the pleated structure increases the effective filter surface area. This leads to better air circulation in the enclosure and more even cooling of electronic components. The
protection rating IP 55 according to IEC 60 529 is achieved when mounted in a filter fan or outlet filter, meaning the filter is dust-tight and protected against splashing water. This makes it suitable for use in industrial environments with increased contamination risk.
Compatibility and Accessories
The filter is specifically designed for Rittal filter fan models 3240.3xx, 3240.7xx, 3240.900, 3241.7xx, and 3241.900. The performance data, protection rating, and approvals of the devices are only guaranteed when used with original Rittal filter mats. It is not suitable for EMC filter fans, as these require special electrical shielding incompatible with this filter type.
Installation and Mounting
Mounting is done directly into the designated filter fan or outlet filter. The filter mat is inserted into the device, with dimensions precisely matched to the fan models. The packaging unit contains 5 pieces, sufficient for regular maintenance and replacement intervals.
Operational Advantages
The
pleated filter technology increases airflow, improving fan cooling performance and reducing energy consumption. Better filtration results in less dust inside the enclosure, extending the service life of electronic components. Longer intervals between maintenance reduce service costs. The
protection rating IP 55 ensures reliable operation in contaminated environments, enhancing operational safety.