Rittal 3179801, EAN: 4028177962569

Rittal 3179801 SK 3179801 wall-mounted cooling unit 500 W without condensate

Industrial Material > Enclosures / Chassis > Rack-Climatization

Rittal 3179801 SK 3179801 wall-mounted cooling unit 500 W without condensate

Lieske Part No. 1101763
Mfg Part No 3179801
EAN-Code 4028177962569
Manufacturer Rittal
Here only 1.453,60 EUR
1.729,78 EUR incl. VAT

Further information for Rittal 3179801 SK 3179801 wall-mounted cooling unit 500 W without condensate

General
ModelWall surface mounted
Materialsteel sheet
Basic colourRAL 7035
ColourHousing: RAL 7035, louver grille: RAL 7012
Scope of deliveryCondenser with hydrophobic RiNano coating, including mounting material, pre-wired for connection (pluggable terminal block)
OptionsFor remote monitoring and networking of cooling units and chillers from the Blue e+ generation, use the IoT interface with article number 3124.300. Increase machine availability and process safety by remotely monitoring device data, statuses and system messages.
Total cooling capacity according to DIN EN 14511Cooling capacity L35 L35/50 Hz: 0.52 kW, Cooling capacity L35 L35/60 Hz: 0.52 kW, Cooling capacity L35 L50/50 Hz: 0.32 kW, Cooling capacity L35 L50/60 Hz: 0.32 kW
Rated operating voltage110 V - 240 V, 1~, 50 Hz/60 Hz
NotePlease note the mounting instructions., By downloading the software, a contract is established between the contracting party and Rittal regarding the free use of the software according to these license terms., Only suitable for semi-outdoor use (see instruction manual for description)
Note on part numberTolerance: 110 V -10 % (99 V) and 240 V +10 % (264 V)
Rated power0,36 kW
Air performance (free blowing)External circuit: 366.6 m³/h, internal circuit: 366.6 m³/h
Energy efficiency ratio (EER) 50/60 Hz L35 L35Cooling capacity factor L35 L35 (EER) 50 Hz: 2.03, Cooling capacity factor L35 L35 (EER) 60 Hz: 2.03
Width300 mm
Height570 mm
Depth199 mm
Required mounting cutoutCutout width: 280 mm, cutout height: 550 mm
Degree of protection IP according to EN 60 529Internal circuit IP 55
NEMA degree of protectionUL Type 1, UL Type 12
Refrigerant/cooling mediumRefrigerant: R-513A, quantity: 0.16 kg, Global Warming Potential (GWP): 631, CO₂ equivalent (CO₂e): 0.1 t
Temperature controle+ Controller (factory setting +35 °C)
Operating temperature range-20 °C...60 °C
Storage temperature range-40 °C...70 °C
Operating temperature range refrigerant circuit (active)3 °C...60 °C
Operating temperature range heat pipe-20 °C...45 °C
Adjustment range20 °C...50 °C
Rated power PelRated power L35 L35/50 Hz: 0.26 kW, Rated power L35 L35/60 Hz: 0.26 kW, Rated power L35 L50/50 Hz: 0.31 kW, Rated power L35 L50/60 Hz: 0.31 kW
Permissible operating pressure (p max.)32 bar
PCF/VE (Cradle-to-Gate)227,1
Rittal SK 3179801 is a wall-mounted cooling unit of the Blue e+ S series, specifically designed for climate control of enclosures and electronic devices. It regulates temperature inside enclosures to ensure a stable operating environment for sensitive electronic components. The unit is made of steel sheet and features a base color of RAL 7035, with the louver grille in RAL 7012. The wall-mounted design allows for flexible installation on the enclosure door or on a wall within the enclosure area. Dimensions are 300 mm (width) × 570 mm (height) × 199 mm (depth), requiring a mounting cutout of 280 mm (width) × 550 mm (height).

Applications
This cooling unit is intended for use in semi-outdoor environments, meaning it can be used in areas with limited weather exposure, such as covered areas or enclosures that are not fully weather-protected. It is designed for operating temperatures from -20 °C to 60 °C, with the refrigerant circuit operating actively between 3 °C and 60 °C. Storage temperature ranges from -40 °C to 70 °C. Temperature control is managed by an e+ controller, factory-set to +35 °C, with an adjustable range between 20 °C and 50 °C.

Functions and Equipment in Detail
The unit features a condenser with hydrophobic RiNano coating, which reduces condensation formation and simplifies maintenance. The delivery includes the cooling unit with mounting hardware and is pre-wired for connection, featuring a plug-in terminal strip. Air performance in free blow mode is 366.6 m³/h for both the external and internal circuits. Total cooling capacity according to DIN EN 14511 is 0.52 kW under L35 L35 operation (at 50 Hz and 60 Hz), and 0.32 kW under L35 L50 operation. Rated capacity is 0.36 kW.

Technology Explained Simply
The cooling unit operates with refrigerant R-513A, which has lower environmental impact. The refrigerant quantity is 0.16 kg, with a Global Warming Potential (GWP) of 631 and a CO₂ equivalent of 0.1 t. Energy efficiency is described by the coefficient of performance (EER) of 2.03 at 50 Hz and 60 Hz (L35 L35), indicating efficient cooling with moderate power consumption. The rated operating voltage is between 110 V and 240 V, 1~, and is designed for frequencies of 50 Hz and 60 Hz. Permissible voltage tolerance is 110 V -10 % (99 V) and 240 V +10 % (264 V). The permissible operating pressure is 32 bar.

Compatibility and Accessories
For remote monitoring and networking of Blue e+ generation cooling units, the IoT Interface with article number 3124.300 can be used. This enables monitoring of device data, statuses, and system messages to increase machine availability and process safety. Suitable accessories include a universal condensate collection bottle, SK condensate hose, door position switch, metal filters, filter mats, SK temperature sensor, and VX support roller.

Installation and Mounting
Mounting is done on the enclosure door or on a wall within the enclosure area. Required mounting cutouts are 280 mm (width) and 550 mm (height). The unit is pre-wired for connection, simplifying installation. The protection rating of the internal circuit is IP 55 according to EN 60 529, meaning it is dust-tight and protected against water spray. The NEMA protection rating corresponds to UL Type 1 and UL Type 12, providing protection against contact and water spray.

Operational Advantages
The cooling unit offers worldwide usability due to multi-voltage capability and country-specific certifications. Intelligent temperature control and remote monitoring via the IoT Interface enhance operational safety. The hydrophobic RiNano coating on the condenser reduces condensation and lowers maintenance effort. Energy efficiency leads to an average energy saving of 75 % and reduces the CO₂ footprint of the system. Convenient operation is enabled via the Rittal Scan & Service App.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1101763
qrcode für Rittal 3179801 SK 3179801 wall-mounted cooling unit 500 W without condensate