| General |
| Model | for roof ventilators |
| Material | Folding filter: base polyester, meltblown polycarbonate |
| Note | The performance data, degree of protection and approvals of the devices are only guaranteed in combination with original Rittal filter mats. |
| Suitable for part no. | 3138.xxx, 3139.xxx, 3140.xxx |
| Width | 265 mm |
| Height | 100 mm |
| Depth | 18 mm |
| Filter class | According to DIN EN 779: M5, according to DIN EN ISO 16890: ISO ePM10 50 % |
| Degree of protection IP according to IEC 60 529 | IP 54 when mounted in filter & roof fan/exhaust filter |
The article SK 3174120 from Rittal is a
pleated filter for use in
roof fans of the series 3138.xxx, 3139.xxx and 3140.xxx. It serves air purification within enclosure climate control and ensures efficient dust separation to maintain internal hygiene in the enclosure and extend the service life of installed devices. The filter technology is based on a
pleated structure made of polyester as base material and a meltblown polycarbonate overlay, which provides a higher filter surface area and thus improved filtration performance.
Applications
The filter is specifically designed for mounting in
filter and roof fans used in industrial enclosures. It is integrated into the outlet filter section to clean the exhausted air from fine particles. The application is in environments where continuous air purification is required to maintain the functionality of electronic components in the enclosure. The filter class according to DIN EN 779 corresponds to
M5, indicating medium particle separation, and according to DIN EN ISO 16890, the class
ISO ePM10 50 % is specified, describing the separation of particles with a diameter of 10 µm and larger by at least 50 %.
Functions and Equipment in Detail
The
pleated filter technology enables a significantly higher airflow compared to conventional nonwoven filters, increasing the performance of fan units and reducing energy consumption. The filter mats are designed to allow longer service life, thereby extending maintenance intervals and reducing service costs. The filters are manufactured in dimensions of
265 mm width, 100 mm height and 18 mm depth, ensuring a precise fit for the specified roof fan models.
Technology Explained Simply
The
pleated structure substantially increases the effective filter surface area without increasing the filter dimensions. This allows more air to be filtered per unit of time, improving climate control efficiency. The material made of
polyester and
meltblown polycarbonate offers a good combination of mechanical stability and filtration performance. The
protection class IP 54 according to IEC 60 529 is achieved when mounted in filter and roof fans, meaning the filter is protected against dust and splashing water and can therefore also be used in outdoor or damp environments.
Compatibility and Accessories
The filter is specifically designed for roof fan models with article numbers 3138.xxx, 3139.xxx and 3140.xxx. The performance data, protection class and approvals of the devices are only guaranteed when used with original Rittal filter mats.
Mounting and Installation
Installation is carried out directly into the designated filter compartment of the roof fans. The filters are designed to be inserted into the fan unit without additional tools or mounting aids.
Operational Advantages
The improved filtration performance keeps the air in the enclosure cleaner, increasing the service life of electronic components. The longer service life of the filter mats reduces maintenance frequency and lowers operating costs. The
IP 54 protection class ensures reliable operation even under harsh operating conditions. The use of original Rittal filter mats guarantees compliance with the specified performance and protection criteria of the fan units.