| General |
| Material | Sheet steel, galvanised |
| Scope of delivery | Wall mounting bracket, end caps, including fastening material |
| Wall distance | 40 mm |
| Suitable for | Enclosure type: AX steel sheet, KX steel sheet, AX IT, EL, wall enclosure AX, 3-piece |
| Type rating according to UL 50E | Type 1, Type 3R, Type 4, Type 12 |
| PCF/VE (Cradle-to-Gate) | 2.2 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The Rittal wall mounting bracket type AX 2503020 is a system accessory specifically developed for mounting wall enclosures, made of galvanized sheet steel. It enables secure and easy mounting of enclosures of types AX sheet steel, KX sheet steel, AX IT, EL, as well as wall-mounted enclosures AX in 3-piece configuration, to walls. The bracket allows for convenient one-person installation even in confined spaces and ensures a constant wall clearance of 40 mm, which provides sufficient ventilation and accessibility.
Applications
The wall mounting bracket is intended for use in industrial and technical installations where wall mounting of enclosures or cabinets is required. It is particularly suitable for applications in production environments where quick and secure mounting under limited space conditions is necessary. Use is permitted in areas complying with UL 50E requirements, including Type Ratings Type 1, Type 3R, Type 4, and Type 12, enabling use in indoor environments, light outdoor applications, and areas exposed to dust and splashing water.
Functions and Equipment in Detail
The bracket is directly screwed into the opening of the enclosure from the rear, using a self-tapping screw. Alternatively, it can also be fastened from the inside using a screw and nut, providing additional stability. Wall mounting is achieved by hanging the bracket onto a pre-installed screw, allowing for quick and precise positioning. Various mounting positions enable adaptation to local conditions. For dynamic applications with additional loads, fastening with a nut is possible to increase mechanical strength.
Technology Explained Simply
The material, galvanized sheet steel, offers high mechanical strength and corrosion protection. The galvanization protects the metal from oxidation and extends the bracket’s service life, especially in humid or slightly corrosive environments. The 40 mm wall clearance ensures the enclosure does not directly touch the wall, enabling sufficient air circulation and supporting heat dissipation. Mounting options using self-tapping screws or screws with nuts offer flexibility during installation and allow for secure anchoring under various conditions.
Compatibility and Accessories
The wall mounting bracket is specifically designed for enclosure types AX sheet steel, KX sheet steel, AX IT, EL, as well as wall-mounted enclosures AX in 3-piece configuration. It is therefore compatible with a wide range of Rittal enclosures used in industrial electrical engineering and automation technology. Use with the mentioned enclosure types is standard, without requiring additional modifications or adapters.
Mounting and Installation
Installation is carried out in two steps: first, the bracket is fastened to the wall using a pre-installed screw. Then, the bracket is inserted into the opening of the enclosure and screwed from the rear using a self-tapping screw. Alternatively, it can be fastened from the inside using a screw and nut.
Operational Advantages
Using the wall mounting bracket reduces installation time and simplifies work, especially during one-person installations. Mechanical stability and flexibility in positioning ensure secure mounting of the enclosure. The use of galvanized sheet steel ensures long service life and low maintenance. Compliance with UL 50E Type Ratings guarantees suitability for various environments, including light outdoor use.