| General |
| Model | Through wiring, 3-pole (with socket and plug) |
| Colour | Orange |
| Length | 1.000 mm |
| AWG | AWG 16 |
| Standards | Power supply cables: AVLV2, power supply plug connectors: ECBT2 |
| Rated operating voltage | 100 V - 240 V, 1~, 50 Hz/60 Hz |
The Rittal SZ 2500530 is a
connection cable for
through-wiring in enclosures and systems, specifically designed for simple and time-saving connection of the
LED system light. The product features a
3-pole configuration with integrated plug and socket, enabling direct connection without additional connection components. The cable is coloured
orange, making it highly visible in the enclosure and allowing for quick identification. With a
length of 1,000 mm, it provides sufficient clearance for installation in standard enclosure configurations.
Applications
The connection cable is primarily intended for use in industrial enclosures, particularly for connecting LED system lights. These lights are used for illumination inside enclosures and are often part of systems for visual signalling or to support maintenance work. Through-wiring enables clean and structured cabling, reducing installation time and improving clarity within the enclosure.
Functions and Equipment in Detail
The cable is equipped with a
plug and socket, ensuring quick and secure connection. The
3-pole design covers the required conductors for phase, neutral, and protective earth. The
orange colour is typical for connection cables in enclosures and serves to visually distinguish them from other cables. The
length of 1,000 mm is sufficient for most standard applications, eliminating the need for additional cable extensions.
Technology Explained Simply
The cable complies with the
AWG 16 specification, corresponding to a cross-sectional area of approximately 1.31 mm². This cross-section is suitable for power transmission in enclosure applications and ensures adequate current-carrying capacity with low resistance. The
rated operating voltage is 100 V to 240 V, 1~, 50 Hz/60 Hz, enabling use in standard mains voltage installations in Europe and other regions. The standards
AVLV2 for mains connection cables and
ECBT2 for mains connection plug connectors guarantee compliance with relevant safety and quality standards. The
UL approval (UR + C-UR recognized) confirms conformity with requirements set by Underwriters Laboratories, which is particularly relevant for use in international projects.
Compatibility and Accessories
The connection cable is specifically designed for use with Rittal system lights. Compatible accessories available in the range include
cable ties with a length of 150 mm, which can be used to secure and organise the cable within the enclosure. These cable ties support orderly cabling and prevent loose or uncontrolled cable runs.
Installation and Mounting
Installation is performed by simply inserting the plug into the socket of the system light and the corresponding socket in the enclosure or at another connection point. Through-wiring allows the cable to be routed without additional connection boxes or terminals. The cable is designed for direct installation in enclosures, and the use of cable ties is recommended to ensure proper cable routing.
Operational Advantages
The SZ 2500530 reduces installation time through the integrated plug-socket combination and pre-defined length. The clear colour coding facilitates identification and maintenance. Compliance with AVLV2 and ECBT2 standards, as well as UL approval, ensures reliability and safety in operation. The cable is designed for use in industrial environments where robust and maintenance-friendly cabling is required.
Note: Cable ties are not included in the delivery scope.