| General |
| Material | Stainless steel 1.4301 (AISI 304) |
| Surface protection | Linear finish, grit 240 |
| Scope of delivery | Including mounting hardware |
| Mounting options | Screwable under dynamic loads |
| Height | 37 mm |
| Type rating according to UL 50E | Type 1, Type 3R, Type 4, Type 4X, Type 12 |
| Suitable for | Enclosure type: AX, width: = 600 mm, depth: = 210 mm |
The Rittal AX 2473010 is a protective roof made of stainless steel, specifically designed for enclosures of type AX with a width of 600 mm and a depth of 210 mm. It serves as a protective cover for the top of the enclosure, repelling standing moisture and contaminants from above due to its sloped design. The product is made of stainless steel 1.4301 (AISI 304), a material known for its corrosion resistance and mechanical strength in industrial environments. The surface features a brushed finish with grit 240, providing a uniform, easy-to-clean, and aesthetically pleasing surface.
Applications
This protective roof is intended for use in industrial installations where enclosures are exposed to increased stress from weather influences, dust, or splashing water. The sloped design ensures that precipitation runs off quickly and no water accumulates on the top surface, extending the service life of the enclosure and its contents. It is particularly suitable for outdoor installations or areas with high humidity.
Functions and Equipment in Detail
The protective roof is mounted by screwing and is designed for dynamic loads, meaning it remains securely fastened even under vibrations or mechanical stress. The height of the protective roof is 37 mm, providing sufficient coverage for most standard enclosures of these dimensions.
Technology Explained Simply
The use of stainless steel 1.4301 (AISI 304) offers high resistance to corrosion, even in moist or slightly aggressive environments. The brushed surface (grit 240) is not only visually appealing but also easy to clean and resistant to contamination. The sloped shape of the roof ensures that precipitation and dirt particles do not remain on the surface but run off, enhancing the functionality and hygiene of the enclosure.
Compatibility and Accessories
The protective roof is specifically designed for enclosures of type AX with dimensions width 600 mm and depth 210 mm. It is not suitable for other enclosure types or dimensions. Compatibility is limited to these specific dimensions to ensure secure and functional mounting. It is used in conjunction with the AX enclosure system, which is widely used in many industrial applications.
Mounting and Installation
Installation is done by screwing, using the included mounting hardware. The fastening is designed for dynamic loads, meaning the protective roof remains securely in place even under vibrations or mechanical stress. Installation requires no special tools other than a screwdriver or screw clamp, which are typically available in workshop inventories.
Advantages in Operation
The use of stainless steel and the sloped design extends the service life of the enclosure by protecting the top from moisture and contamination. The simple mounting and included fastening materials reduce installation time. Compliance with UL 50E Type Ratings (Type 1, Type 3R, Type 4, Type 4X, Type 12) ensures suitability for various environments, including moist or dusty areas, and guarantees conformity with international safety standards.