| General |
| Model | Hygienic Design housing |
| Material | Housing and cover: stainless steel 1.4301 (AISI 304) 1.5 mm, locking screw: stainless steel, seal: silicone, compliant with FDA regulation 21 CFR 177.2600 |
| Surface protection | Enclosure and cover: brushed finish, grit 400, roughness depth < 0.8 µm, seal: blue tinted (RAL 5010) |
| Scope of delivery | housing fully enclosed, cover with push-button cutout, seal and locking screw (included) |
| Width front | 160 mm |
| Width at rear | 182 mm |
| Height front | 220 mm |
| Height at rear | 242 mm |
| Depth | 90 mm |
| Modular spacing | 60 mm |
| Cutouts (number x Ø) | 6 x 30,5 mm |
| IK code | IK08 |
| Base material | Stainless steel 1.4301 (AISI 304) |
| Lock | Closure type: Hygienic hexagonal quick-release fastener, Number of closures: 4 |
| Degree of protection IP according to IEC 60 529 | IP 66, IP X9 |
| NEMA degree of protection | NEMA 1, NEMA 3, NEMA 3X, NEMA 4, NEMA 4X, NEMA 12, NEMA 13 |
| Type rating according to UL 50E | Type 1, Type 3, Type 3X, Type 4, Type 4X, Type 12, Type 13 |
The Rittal HD 1686630 is a push-button housing in Hygienic Design, specifically designed for use in the food and beverage industry. It serves as a closed cover for control elements such as push-buttons and switches, with surfaces and construction optimized for easy cleaning and hygiene. The housing is made of stainless steel 1.4301 (AISI 304) with a wall thickness of 1.5 mm, ensuring high corrosion resistance and mechanical stability. The surface is brushed with a grit 400 and a Ra depth under 0.8 µm, creating a smooth, easy-to-clean surface. The silicone seal is blue-coloured (RAL 5010) and compliant with FDA regulation 21 CFR 177.2600, allowing use in food environments.
Hygienic Design housing is the central configuration, tailored to the requirements of the food industry. The housing is fully enclosed, preventing any gaps where dirt or moisture could accumulate. The seal fits flush between the housing and lid, ensuring effective sealing against dust and liquids. The housing has a 3° forward tilt, improving liquid runoff and facilitating cleaning.
Protection rating IP 66 and IP X9 according to IEC 60 529, as well as protection ratings NEMA 1, 3, 3X, 4, 4X, 12 and 13, and Type rating according to UL 50E (Type 1, 3, 3X, 4, 4X, 12, 13), provide high protection against dust, water and splashing water. IP 66 means dust-tight and protects against powerful water jets from any direction, while IP X9 ensures resistance to high-pressure cleaning with hot or cold liquids. These protection ratings make the housing suitable for use in damp, dirty or heavily cleaned environments.
IK08 is the built-in protection against mechanical impact, providing resistance to shocks and vibrations up to 5.3 J (equivalent to a drop from 0.5 m height with a 1.0 kg weight). This protects the housing and installed components from damage due to mechanical stress.
Closure is achieved via hygienic hexagon quick-release fasteners, with four fasteners mounted on the housing. These fasteners allow for quick and secure assembly and disassembly of the lid without allowing dirt to enter the connection. The fastener screws are also made of stainless steel to prevent corrosion.
The
dimensions are 160 mm (width) × 220 mm (height) × 90 mm (depth) at the front, and 182 mm (width) × 242 mm (height) at the back. The mounting pitch is 60 mm, enabling standardized installation. The housing features six openings with a diameter of 30.5 mm, intended for mounting push-buttons or switches. The delivery includes the housing, lid with push-button cutout, seal, and fastener screws.
Compatibility and accessories include wall spacing brackets HD with a spacing of 50 mm, which improve air circulation and accessibility. Earthing straps M6-M6 with a cross-section of 10 mm² and a length of 200 m, as well as SZ pressure equalization plugs made of stainless steel 1.4305, can be used additionally to ensure electrical safety and pressure equalization within the housing.
The housing is designed for industrial environments where high hygiene requirements, mechanical stress, and moisture protection are necessary. The use of stainless steel and silicone seals ensures long service life and ease of maintenance. Installation is carried out using the provided fasteners and openings, with precise positioning facilitated by the 60 mm mounting pitch. The combination of Hygienic Design, high protection rating, and robust materials makes the Rittal HD 1686630 a reliable solution for demanding applications in food processing and other sensitive industrial sectors.