Rittal 1566000, EAN: 4028177919204

Rittal 1566000 Terminal Box Stainless Steel

Industrial Material > Enclosures / Chassis > Enclosures

Rittal 1566000 Terminal Box Stainless Steel

Lieske Part No. 1778292
Mfg Part No 1566000
EAN-Code 4028177919204
Manufacturer Rittal
Here only 198,49 EUR
236,20 EUR incl. VAT

Further information for Rittal 1566000 Terminal Box Stainless Steel

General
MaterialHousing: Stainless steel 1.4301 (AISI 304), Cover: Stainless steel 1.4301 (AISI 304), continuous foamed PU seal
Surface protectionHousing and cover: fine grinding, grit 180
Scope of deliveryHousing with cover, quick-release fastener including plastic inserts
Width300 mm
Height200 mm
Depth120 mm
Degree of protection IP according to EN 60 529IP 66
NEMA degree of protectionNEMA 1, NEMA 3R, NEMA 3RX, NEMA 4, NEMA 4X, NEMA 12
Type rating according to UL 50EType 1, Type 3R, Type 3RX, Type 4, Type 4X, Type 12
Material thickness cover1,25 mm
Plate thickness cabinet1,25 mm
LockNumber of locks: 4
Base materialStainless steel 1.4301 (AISI 304)
PCF/VE (Cradle-to-Gate)11,33
The Rittal KX 1566000 is a terminal box made of stainless steel 1.4301 (AISI 304), designed for use in industrial applications where high mechanical strength, corrosion resistance, and protection against environmental influences are required. The housing has dimensions of 300 mm width, 200 mm height, and 120 mm depth, and is suitable as a compact solution for mounting terminals, connectors, or small electrical components. It features a fixed lid with a continuously foamed PU seal, ensuring a tight seal. The surface of the housing and lid is brush-finished with a grit of 180, providing a uniform, easy-to-clean, and corrosion-resistant surface.

Applications
This terminal box is designed for use in industrial environments, particularly in areas with high humidity, dust exposure, or aggressive chemicals. The protection rating IP 66 according to EN 60 529 ensures dust-tight and water-tight sealing, even under strong splashing water, making it suitable for outdoor use or in damp indoor areas. The approvals according to NEMA (NEMA 1, 3R, 3RX, 4, 4X, 12) and UL 50E (Type 1, 3R, 3RX, 4, 4X, 12) confirm suitability for various industrial requirements, including mounting in damp, dusty, or mildly corrosive environments.

Functions and Equipment in Detail
The housing is made as a single piece, bent and welded, creating a stable, wear-resistant construction. The rear wall is closed and features embossing for secure mounting. The lid is equipped with a continuous protective flange that additionally protects the seal. Earthing is achieved via a protective conductor connection in the housing and a bolt in the lid, ensuring quick and secure earthing. The delivery includes the housing with lid and four quick-release fasteners including plastic bushings, enabling simple and secure locking.

Technology Explained Simply
The material thickness of 1.25 mm for housing and lid ensures sufficient strength to withstand mechanical loads. The use of stainless steel 1.4301 (AISI 304) provides high corrosion resistance, especially against moisture and mild chemicals. The IP protection rating 66 means the housing is dust-tight and protected against strong splashing water, which is crucial for use in damp or wet environments. The PU seal ensures a tight seal between housing and lid, maintaining the protective function over the long term.

Compatibility and Accessories
Various accessories are available for this terminal box, expanding mounting and usage options. These include mounting clips for support rails, support rails in formats TH 35/7.5 and TS 35/15, mounting brackets, stainless steel 1.4404 lid hinges, condensate drains, baying sets for combination with other KX models, ST 4.8 L9.5 mm screws, mounting brackets, wall mounting brackets made of stainless steel 1.4301, SZ pressure equalization plugs made of stainless steel 1.4305, AX mast mounting brackets, earthing straps M6-M6 with a cross-section of 10 mm², mounting plates for terminal boxes and bus enclosures, mounting claws for a second mounting level, and SZ wall mounting brackets made of stainless steel 1.4301. These components enable flexible and application-specific mounting, e.g., on walls, support rails, or masts.

Mounting and Installation
Mounting is done via the designated fastening points on the housing. The quick-release fasteners allow for easy and quick lid installation. When using accessories such as wall mounting brackets or support rails, the terminal box can be mounted on various substrates. Mounting plates and mounting claws allow use on multiple mounting levels, which is advantageous for complex installations.

Operational Advantages
The terminal box offers high mechanical stability and corrosion resistance, increasing service life and reliability in demanding environments. The IP 66 protection rating ensures reliable protection against dust and water, guaranteeing operational safety. The integrated earthing via protective conductor connection and bolt in the lid simplifies secure electrical connection. The brush-finished surface is easy to clean and provides a uniform visual appearance. The use of stainless steel 1.4301 (AISI 304) ensures high resistance to environmental influences, especially in damp or mildly corrosive environments. The accessory compatibility allows flexible adaptation to different mounting conditions and requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1778292
qrcode für Rittal 1566000 Terminal Box Stainless Steel