| General |
| Material | Housing: steel sheet, cover: steel sheet, continuously foamed PU seal |
| Surface protection | Housing and cover: dip primed, externally powder coated, textured lacquer |
| Colour | RAL 7035 |
| Scope of delivery | housing with cover, mini-quick-release latch |
| Width | 500 mm |
| Height | 200 mm |
| Depth | 120 mm |
| Degree of protection IP according to EN 60 529 | IP 66 |
| NEMA degree of protection | NEMA 1, NEMA 3R, NEMA 4, NEMA 12 |
| Type rating according to UL 50E | Type 1, Type 3R, Type 4, Type 12 |
| IK code | IK08 |
| Material thickness cover | 1,25 mm |
| Plate thickness cabinet | 1,25 mm |
| Base material | steel sheet |
| PCF/VE (Cradle-to-Gate) | 33.37 kg CO2 eq (Cat B) |
| Note on PCF class | Category B: PCF value (Cradle-to-Gate) approximately calculated based on product weight and self-declared |
The KX 1505000 is an industrial terminal box from the brand Rittal, designed as a small housing made of sheet steel. It serves as a protected enclosure and mounting container for electrical components such as terminals, switches, or small control units, particularly in environments with increased requirements for mechanical and weather protection. The housing has dimensions of width 500 mm, height 200 mm, and depth 120 mm, and is supplied without a mounting plate and without a gland plate, allowing for flexible integration into various installation scenarios.
Small housing with
protection class IP 66 provides high protection against dust and water, including heavy splashing and jet water. This protection class corresponds to standards EN 60 529 as well as NEMA classifications NEMA 1, NEMA 3R, NEMA 4, and NEMA 12, and Type rating according to UL 50E in categories Type 1, Type 3R, Type 4, and Type 12. The
IK08 rating ensures mechanical protection against impact forces typical of industrial operating conditions. The continuously foamed PU seal between housing and lid ensures a tight seal and prevents ingress of moisture or particles.
Material and surface consist of sheet steel with a material thickness of 1.25 mm for both the housing and the lid. The surface is dip-primed and externally powder-coated with a textured lacquer in the colour RAL 7035, ensuring high corrosion resistance and resistance against mineral oils, lubricants, machining emulsions, and solvents. The coating is part of a three-stage surface treatment designed for optimal long-term durability in industrial environments.
Functions and equipment in detail include a housing with integrated lid and a mini-latch lock, enabling secure and quick closure. The rear wall of the housing features eyelets intended for mounting on a wall mounting bracket. The inner side of the lid and housing are equipped with PE conductors, enabling quick and easy earthing. A QR code is printed on the housing, lid, and type plate to enable unique identification and access to relevant product information and documentation.
Compatibility and accessories allow combination with various Rittal accessories intended for flexible internal fitting. These include mounting clips for support rails, plug-throughs (e.g. SZ 2400500), pressure equalization plugs (e.g. SZ M12x1.5), support rails (TH 35/15), mounting angles, condensate drains, baying sets for AX, KX, AE, KL, drill screws (type ST 4,8 L9,5 mm), mounting brackets, spacing angles for shock protection covers, zinc die-cast lid hinges, mounting plates (e.g. for terminal box KX, bus housing KX, 1565800), mounting claw for second mounting level, and wall mounting brackets for AX sheet steel KX models.
Mounting and installation is carried out via the provided eyelets on the rear wall, suitable for fastening to wall mounting elements. The use of support rails or mounting plates enables structured and secure placement of components inside the housing. The material thickness and construction from a single sheet, folded and welded, ensure high stability and dimensional stability.
Operational advantages lie in the combination of high protection class, mechanical strength, and flexible internal equipment. The IP 66 protection class makes the housing suitable for outdoor use or in damp, dusty industrial environments. The IK08 rating protects against mechanical impacts, such as those occurring during mounting or maintenance work. The powder-coated surface in RAL 7035 provides a visually uniform and durable design that integrates well into industrial facilities. The integrated earthing and designated mounting points reduce installation time and increase safety during commissioning.
The product is delivered as a single unit, consisting of the housing with lid and the mini-latch lock.