| General |
| Model | Hygienic Design housing |
| Market-relevant product changes | The compact control cabinet HD, single-door, will receive from June 2020 the new mounting plate of the compact control cabinet AX. |
| Material | Housing and door: stainless steel 1.4301 (AISI 304), mounting plate: sheet steel, locking insert HD: stainless steel 1.4404 (AISI 316L), sealing: silicone, compliant with FDA regulation 21 CFR 177.2600 |
| Surface protection | Housing and door: brushed finish, grit 400, roughness depth < 0.8 μm, mounting plate: galvanised, seal: blue tinted (RAL 5010) |
| Scope of delivery | Housing fully enclosed, door with inserted seal, door hinge on right, reversible to left, mounting plate |
| Width | 810 mm |
| Height front | 650 mm |
| Height at rear | 821 mm |
| Depth | 300 mm |
| Mounting plate dimensions (W x H) | 750 mm x 575 mm |
| Door opening angle | 125° |
| Number of locks | 2 |
| IK code | IK08 |
| Base material | Stainless steel 1.4301 (AISI 304) |
| Degree of protection IP according to IEC 60 529 | IP 66, IP X9 |
| NEMA degree of protection | NEMA 1, NEMA 3, NEMA 3X, NEMA 4, NEMA 4X, NEMA 12, NEMA 13 |
| Type rating according to UL 50E | Type 1, Type 3, Type 3X, Type 4, Type 4X, Type 12, Type 13 |
| PCF/VE (Cradle-to-Gate) | 121,98 |
The Rittal HD 1315.600 is a
Hygienic Design enclosure made of stainless steel, specifically designed for use in the food and beverage industry. The
compact enclosure model features a single-door construction with an integrated sloped roof, inclined at 30° forward, to enable effective water drainage and easy cleaning. The enclosure is formed from a single piece, bent and welded, fully enclosed all around, and features no additional gaps or dead spaces, meeting hygiene requirements. The door is equipped with continuous 10° inclined flanges and features a gap-free transition to the enclosure, preventing crevices. The door seal is made of
silicone, compliant with FDA regulation 21 CFR 177.2600, and is blue-coloured (RAL 5010) to be clearly distinguishable from food products.
Applications
This enclosure model is intended for environments with high hygiene and cleaning requirements, such as food processing, beverage industry, or pharmaceutical production. The special design with integrated drip edge protects the upper door seal and enables safe cleaning. The
protection rating IP 66 and
IP X9 ensure high protection against dust, water, and high-pressure cleaning, while the
protection rating NEMA 4X and
Type Rating according to UL 50E confirm suitability for wet and aggressive environments. The
IK code IK08 certification ensures sufficient impact resistance against mechanical stresses.
Functions and Equipment in Detail
The enclosure is made of
stainless steel 1.4301 (AISI 304), suitable for its corrosion resistance and hygiene-friendly properties. The door is standard right-hinged, but can be converted to left-hinged. The steel sheet mounting plate is galvanised and has dimensions 750 mm (W) x 575 mm (H). The door opens up to an angle of 125°, providing good access to the interior. The locks are designed in hygienic style, with the lock insert made of
stainless steel 1.4404 (AISI 316L) to ensure easy cleaning without recesses or gaps. The surface of the enclosure and door is brush-finished (grit 400, roughness < 0.8 μm), creating a smooth, easy-to-clean surface.
Technology Explained Simply
The
IP 66 protection rating means the enclosure is dust-tight and protected against powerful water jets from any direction. The
IP X9 certification refers to resistance against high-pressure cleaning, which is crucial in the food industry. The
NEMA 4X classification guarantees protection against splashing water, dust, and corrosion, even in salt-laden environments. The
IK08 impact resistance protects the enclosure from mechanical stresses, such as those occurring during transport or installation. The integrated drip edge on the roof prevents water from dripping onto the door seal, extending the seal’s lifespan and simplifying cleaning.
Compatibility and Accessories
Various accessories are available to extend the hygienic setup, including
HD wall spacers with a 50 mm distance, improving air circulation and cleaning.
HD viewing windows in various sizes (e.g. 470x290 mm and 330x190 mm) made of stainless steel 1.4301 are also available, equipped with knob handles. For cable connections,
cable strain relief rails for mounting plates (length 699 mm) can be used. The locks can be operated with a
universal key and matching
Bit HD for universal key 2549500. Additionally,
HD knob handles and
knob handles with safety cylinder insert made of stainless steel are available.
SZ pressure equalisation plugs made of stainless steel 1.4305 can be used for air permeability when the door is closed.
Installation and Mounting
The enclosure comes pre-equipped with a mounting plate, enabling easy attachment to walls or stands. The door hinge direction is standard right, but can be changed to left to adapt to specific mounting conditions. The integrated drip edge and sloped roof facilitate installation in environments where water drainage and cleaning are important. The mounting plate provides sufficient space for securing enclosure components.
Operational Advantages
The Rittal HD 1315.600 offers high operational reliability due to its robust stainless steel construction and hygienic design. Easy cleaning, enabled by the gap-free construction and blue-coloured seal, reduces the risk of contamination. The high protection rating and impact resistance ensure long service life even in demanding environments. The integrated mounting plate and the option to change the door hinge direction increase installation flexibility. Compatibility with various accessories allows custom adaptation to specific requirements.
Scope of Delivery
The product is delivered as a fully enclosed enclosure, including door with inserted seal, right-hinged door (convertible to left), and mounting plate. The seal is blue-coloured (RAL 5010) and made of silicone, compliant with FDA regulation 21 CFR 177.2600. The mounting plate has dimensions 750 mm (W) x 575 mm (H). The door opens up to 125°, and the enclosure features two hygienic design locks.
Certifications
The product is UL- and cUL-certified (listed) and complies with standards IEC 60 529, NEMA, and UL 50E. The certifications include protection ratings IP 66, IP X9, NEMA 1, 3, 3X, 4, 4X, 12, 13, and Type Rating 1, 3, 3X, 4, 4X, 12, 13. The IK code certification is IK08. The declaration of conformity and PCF declaration (Cradle-to-Gate) are available.
Dimensions
The enclosure dimensions are 810 mm (width) x 650 mm (height front) x 821 mm (height rear) x 300 mm (depth). The mounting plate has dimensions 750 mm (W) x 575 mm (H). The net weight is 39 kg, and the gross weight is 39.5 kg.
Manufacturer and Model
Manufacturer: Rittal GmbH & Co. KG
Manufacturer's number: 1315600
Type: HD 1315.600
Category: Industrial materials › Enclosures / cabinets › Enclosure systems
Accessories
Compatible accessories include: HD wall spacers (50 mm spacing), HD viewing windows (470x290 mm and 330x190 mm), cable strain relief rails (699 mm), Bit HD for universal key 2549500, universal key, SZ pressure equalisation plugs (stainless steel 1.4305), HD knob handle, knob handle with safety cylinder insert (stainless steel). These components enable a complete hygienic installation.