Rittal 1182096, EAN: 4028177973305

Rittal 1182096 profiles 42 HE

19 Inch-Technology > Accessories/Equipment > Profiles

Rittal 1182096 profiles 42 HE

Lieske Part No. 1103926
Mfg Part No 1182096
EAN-Code 4028177973305
Manufacturer Rittal
Here only 764,49 EUR
909,74 EUR incl. VAT

Further information for Rittal 1182096 profiles 42 HE

General
ModelEnclosure frame VX with roof sheet, without front and rear door, ventilated, without side walls
Surface protectionCabinet frame: dip primed, interior: painted
Basic colourRAL 7035
Colourhousing frame and roof: RAL 7035, interior: RAL 9005
Scope of deliverycabinet frame, profile rails, 482.6 mm (19"), spacers, height 50 mm, for raising a cover plate above the fan opening in the roof panel, for passive ventilation (included). Not required for variants without opening., 12 x 19"-fasteners 1 HE, conductive (included), 25 internal hexagon screws, conductive (included), IPPC pallet, roof panel, multi-part, with side cable entry in depth, both sides, prepared for fan panel
Width800 mm
Height2.000 mm
Depth800 mm
Height units42 HE
Mounting clearance to 19" plane, front/back150 mm / 130 mm
Layer spacing (as delivered)520 mm
19" mountingScrewed to top and bottom crossbar
Roof typeMulti-part, with lateral cable entry in depth, on both sides, prepared for fan panel
Profile rail version19" profile rails standard in VX IT
Floor versionOpen
19" rack configurationFront and rear
Load capacity8.000 N
Max. load capacity (static) according to UL 2416 per cabinet8.000 N
Base materialsteel sheet
The article VX 1182096 from Rittal is a 48,3 cm ( 19 inch )-enclosure frame of the VX IT Open series, designed as an open frame for use in secured environments or as a basis for individual configurations in the Rittal RiPanel system. The unit features a height of 2,000 mm, a width of 800 mm, and a depth of 800 mm, with height units (HE) amounting to 42. The 48,3 cm ( 19 inch )-profile rails are screwed to the cross-braces at the top and bottom, enabling stable mounting of IT and electronics equipment. The frame is supplied without front and rear doors, as well as without side panels, making it flexible for customer-specific additions with doors, side panels, or other accessories.

Applications
This enclosure frame is suitable for use in IT infrastructures, server rooms, or electronics environments where an open, modular structure is required. It can serve as a base for quick configurations, especially when supplemented with doors, side panels, or base modules from the Rittal accessory range. The open design allows for direct mounting of equipment and flexible cable routing, with lateral cable entry in the roof plate supporting structured cabling.

Functions and Equipment in Detail
The unit is supplied with profile rails in the standard configuration for VX IT, featuring a mounting width of 482.6 mm (48,3 cm ( 19 inch )). The 48,3 cm ( 19 inch ) mounting is secured by screws to the cross-braces at the top and bottom, ensuring a secure and load-bearing installation. The mounting clearance is 150 mm in front and 130 mm at the rear relative to the 48,3 cm ( 19 inch ) plane, providing sufficient space for cables and cabling technology. The roof plate is multi-part and equipped with lateral cable entry at the depth, on both sides, and is pre-fitted for a fan plate. The load capacity is 8,000 N static, matching the maximum load according to UL 2416.

Technology Explained Simply
The enclosure frame is made of sheet steel and is dip-primed in the frame area, while the interior construction is painted. The surface of the enclosure frame and roof is in RAL 7035, and the interior construction is in RAL 9005. The spacing between levels in the delivered state is 520 mm, enabling standard mounting. The base concept is open, allowing the enclosure to be mounted directly on the floor or equipped with individual base modules. The 48,3 cm ( 19 inch ) levels are present at the front and rear, enabling symmetrical mounting of equipment.

Compatibility and Accessories
The enclosure frame is compatible with various accessories from the Rittal system kit. These include, for example, aluminum viewing doors, sheet steel doors (single-piece closed or ventilated), vertically divided viewing or sheet steel doors, and side panels. Additionally, plinth corner pieces with plinth trim panels, component shelves in various heights (0.5 HE to 1.5 HE), and lateral plinth trim panels are available to customize the frame individually.

Mounting and Installation
Mounting is done via the integrated blind rivet nuts M6 on the frame, enabling protection-rated fastening of fittings. The square hole pattern all around allows the use of cage nuts and metric screws up to M8. The base frame is welded and features integrated reinforcements, enabling direct screwing of the enclosure to the floor from the inside. The unit is baying-capable on all sides, allowing flexible placement in row configurations.

Advantages in Operation
The open enclosure frame offers high flexibility in configuration and mounting. The stable construction from sheet steel and the high load capacity of 8,000 N ensure safe operation. The pre-fitted cable entry in the roof plate supports structured cabling, and the modular expandability with doors, side panels, and base modules enables individual adaptation to specific requirements. The dip-primed surface provides a good corrosion protection base, while the painted interior construction offers a clean and professional appearance.

Scope of Delivery
The scope of delivery includes: the enclosure frame, profile rails (482.6 mm / 48,3 cm ( 19 inch )), spacers (height 50 mm), 12 x 48,3 cm ( 19 inch ) fasteners 1 HE (conductive), 25 internal hexagon screws (conductive), IPPC pallet, and the multi-part roof plate with lateral cable entry, on both sides, pre-fitted for fan plate.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1103926
qrcode für Rittal 1182096 profiles 42 HE