| General |
| Material | Housing: stainless steel, door: stainless steel, continuous foamed PU seal, mounting plate: sheet steel, stainless steel 1.4301 (AISI 304) |
| Surface protection | Casing and door: brushed finish, grit 400, mounting plate: galvanized |
| Scope of delivery | Cabinet with door(s), opening angle 130°, mounting plate, locking: 3 mm double bar |
| NEMA degree of protection | NEMA 1, NEMA 3R, NEMA 4, NEMA 4X, NEMA 12 |
| Degree of protection IP according to EN 60 529 | IP 66 |
| Type rating according to UL 50E | Type 1, Type 3R, Type 4, Type 4X, Type 12 |
| IK code | IK10 |
| Width | 760 mm |
| Height | 760 mm |
| Depth | 300 mm |
| Door material thickness | 2 mm |
| Plate thickness cabinet | 1,5 mm |
| Mounting plate material thickness | 2,5 mm |
| Mounting plate dimensions (W x H) | 705 mm x 735 mm |
| Number of doors | 1 |
| Lock | Locking mechanism type: push-button, number of locks: 2, lock insert: 3 mm double barb, lock material: zinc die-cast |
| Base material | Stainless steel 1.4301 (AISI 304) |
| PCF/VE (Cradle-to-Gate) | 134,55 |
The Rittal AX 1014000 is a compact enclosure made of stainless steel 1.4301 (AISI 304), designed for use in industrial applications where high mechanical strength and protection against environmental influences are required. The enclosure has dimensions of 760 mm width, 760 mm height, and 300 mm depth, and is configured with a single door. It features an integrated mounting plate as well as two latching locks with 3 mm double-bolt inserts, ensuring secure closure. The door opens at an angle of 130°, facilitating access to internal components.
Applications
This enclosure is designed for use in environments requiring protection against dust, water, and mechanical impacts. It is suitable for use in manufacturing, process engineering, or outdoor applications, where it meets the protection rating IP 66. IP 66 means the enclosure is dust-tight and protected against powerful water jets, making it suitable for humid or wet environments. The protection ratings NEMA 4X and Type 4X according to UL 50E confirm suitability for outdoor use and protection against water spray, dust, and chemical gases.
Functions and Equipment in Detail
The enclosure is made from a single piece of bent and welded stainless steel, providing high stability and corrosion resistance. The door is fitted with a continuous foamed PU seal, ensuring a tight seal. The surface of the enclosure and door is brush-finished with grit 400, providing a uniform, easy-to-clean surface finish. The mounting plate, made of galvanized steel sheet, measures 705 mm × 735 mm and features keyhole slots for earthing and dimension markings. Mounting is done using Limbach nuts.
Technology Explained Simply
The door thickness is 2 mm, the enclosure wall thickness is 1.5 mm, and the mounting plate thickness is 2.5 mm, ensuring high mechanical strength. The IK classification IK10 indicates that the enclosure is protected against mechanical impacts such as shocks or vibrations up to a certain energy level. The integrated enclosure lugs allow systematic internal installation without drilling, simplifying the mounting and expansion of components. A QR code on the body, door, and nameplate enables unique identification and easy access to product information and documentation.
Compatibility and Accessories
Various accessories are available for this enclosure, extending its functionality. These include cable glands made of brass and polyamide in various diameters (e.g. M12x1.5, M25x1.5, M40x1.5), wall mounting brackets made of stainless steel 1.4301, baying sets for AX, KX, AE, KL, and circuit diagram pockets made of steel sheet. These components allow flexible adaptation to specific requirements such as cable routing, mounting, or additional mounting surfaces.
Mounting and Installation
Mounting is done using the designated fastening elements on the rear wall of the enclosure. The mounting plate is included in the delivery scope and is secured with Limbach nuts. The door can be mounted on the right side, with the option to reconfigure it to the left side. The integrated lugs enable quick and tool-free installation of internal units.
Advantages in Operation
The enclosure offers high mechanical stability and corrosion resistance due to the use of stainless steel 1.4301. The IP 66 protection rating and IK10 classification ensure reliable operation in demanding environments. The integrated mounting plate and lug system simplify the installation and expansion of components. The latching locks with double-bolt inserts ensure secure closure, protecting against unauthorized access. The brush-finished surface is easy to clean and provides a professional appearance.