PLANET BSP-115PV-15A – Industrial Solar-Powered PoE+ Switch with Smart LCD Monitoring and Energy Control

The PLANET BSP-115PV-15A is a solar-ready Layer 2 Gigabit PoE+ switch engineered for ESG-compliant deployments in off-grid environments such as nature reserves, highways, remote surveillance stations, and smart agriculture. It features 5 RJ45 ports with IEEE 802.3at PoE+ and one 100/1000BASE-X SFP slot, and is compatible with renewable power sources including solar, wind, and hydroelectric energy. The switch supports lead-acid, lithium, and lithium iron phosphate batteries.

Eco-Friendly Power Distribution with Advanced Intelligence

Each of the five PoE ports supports up to 35W, with a total PoE budget of 120W. The integrated LCD panel displays real-time data on solar input, battery charge level, PoE output, ambient temperature, and humidity. Intelligent features like PD Alive Check ensure devices like IP cameras and APs are automatically restarted if unresponsive.

LCD Display for On-Site Visibility

Key information shown on the built-in 1.1-inch LCD includes:

• Solar input voltage and wattage
• Battery voltage, charge level, remaining charge time
• PoE output wattage
• Ambient temperature and humidity

Technical Specifications:

Ports:

• 5 x 10/100/1000BASE-T RJ45 with PoE+ (IEEE 802.3at)
• 1 x 100/1000BASE-X SFP (auto-detecting)
• 1 x 6-pin terminal block (PV, DC, Battery input)

Power over Ethernet:

• 5 PoE+ ports @ up to 35W each
• Total budget: 120W
• PoE management: PD Alive Check, power budgeting
• Max range: 100m (standard), 250m (extend mode @ 10Mbps)

Power Supply:

• Solar input (PV):
• 20–27V (12V battery), up to 405W / 15A
• 32–45V (24V battery), up to 675W / 15A
• Battery Types: Lead-acid, Lithium, LiFePO4 (up to 500AH)
• Integrated MPPT controller (up to 98% efficiency)
• Full protection: Reverse current, overcurrent, reverse polarity, overheating

Switching:

• Architecture: Store-and-Forward
• Switch Fabric: 12Gbps
• Throughput: 8.92Mpps @ 64 bytes
• MAC Table: 2K
• Jumbo Frames: 10K
• Auto MDI/MDI-X, IEEE 802.3x full-duplex flow control

Housing & Environmental:

• IP30-rated metal enclosure
• Desktop or wall-mountable
• Operating Temp: -20 to +65 °C, Storage: -40 to +70 °C
• Humidity: 5–95% (non-condensing)
• ESD: ±4KV (contact), ±8KV (air)
• Surge: 2KV
• Dimensions: 196.72 x 141.8 x 34 mm
• Weight: 820g

Indicators & LCD:

• LCD: 2,8 cm ( 1,1 inch ) screen showing solar, battery, PoE, temperature, humidity
• LEDs: System, BAT in/out, PV in, port status, PoE-in-use

Standards Compliance:

• IEEE 802.3, 802.3u, 802.3ab, 802.3z, 802.3at, 802.3az
• Regulatory: FCC Part 15 Class A, CE