| General |
| Side height | 55 mm |
| Tray shape | grid trough - |
| Connector | moulded - |
| Compatibility | GSV 34 FT, GKS 34 FT, KS GR A2, TSG 45 FS, DGRR 100 FS - |
The GRM 55 100 G grid duct from OBO Bettermann is a cable management system for use in electrical and IT installations. It is designed for structured and secure routing of cables and wiring in indoor environments as well as in protected outdoor areas. The duct features a side height of 55 mm and a width of 100 mm, making it suitable for a wide range of cable cross-sections. The length is 3000 mm, enabling efficient installation over longer distances. The construction from steel sheet with a galvanized surface (St G) ensures high mechanical stability and corrosion resistance, particularly in environments with increased humidity or low chemical exposure.
Applications
The GRM 55 100 G grid duct is typically used in industrial, commercial, and municipal buildings where organized and accessible cable routing is required. It is suitable for installation in halls, production areas, office buildings, or technical rooms such as server or enclosure rooms. The open grid structure allows for good air circulation, supporting cooling of the installed wiring. The duct can be mounted on walls, ceilings, or beams, with mounting achieved using appropriate brackets.
Functions and Features in Detail
A central feature of the grid duct is the
moulded connector, which enables seamless connection between multiple duct sections. This integrated connector ensures continuous cable routing and prevents gaps or unevenness at joints. The grid structure itself consists of a regular mesh pattern, providing stable support for cables without the risk of them falling through the openings. The galvanized surface offers an additional protective layer against oxidation.
Technology Explained Simply
The designation GRM 55 100 G describes the geometric dimensions and material properties: GRM stands for grid duct, 55 mm for the side height, 100 mm for the width, and G for the galvanized surface. The standard length is 3000 mm. The galvanized steel sheet construction provides sufficient strength and durability, even under mechanical stress. The open design of the grid duct allows for easy inspection and maintenance of the installed wiring. The integrated joint connection ensures a clean and secure connection point, eliminating the need for additional connecting parts.
Compatibility and Accessories
The GRM 55 100 G grid duct is compatible with various accessories that enable flexible adaptation to different installation scenarios. These include, for example, the GSV 34 FT joint connector, the GKS 34 FT clamp piece St FT, the KS GR A2 clamp piece for partition strip mounting V2A, the TSG 45 FS partition strip, and the DGRR 100 FS latching cover. These components allow for extension, termination, or mounting of the duct, depending on requirements. The latching cover provides the option to close the duct, protecting the cables from mechanical damage or contamination.
Installation and Mounting
The integrated joint connection simplifies the connection of multiple duct sections, with joints fitting precisely together. The open grid structure allows for easy and quick cable installation, with cables routed through the mesh. Additional cable securing within the duct is generally not required, as the grid structure provides sufficient guidance.
Operational Advantages
The GRM 55 100 G grid duct offers clear and organized cable routing, simplifying maintenance and inspection. The galvanized surface ensures long service life, especially in humid or slightly corrosive environments. The integrated joint connection reduces installation time and ensures a clean visual appearance. The open design supports cable cooling, enhancing operational safety. Compatibility with various accessories allows flexible adaptation to different requirements in the installation sector.