General
Clip size	28 mm
Clip type	Half clamp
Utilization	for cables and pipes
Compatibility with gas-powered nailer	not suitable for sizes 3 and 4
Compatibility with bolt setting tool	not suitable for sizes 3 to 21

The single-lap mounting clip 604 28 G from OBO Bettermann is designed for the secure fastening of cables and pipes to substrates. The product is made of steel and available in size 28 mm. It is a clip designed for use with special fastening tools, subject to certain size restrictions.

Mounting clip
The clip is single-lap, meaning it consists of a single bent metal strip with an opening to enclose the object to be fastened (e.g. cable or pipe). The design enables quick and secure installation, particularly in the electrical and installation industry, where firm anchoring of lines and piping is required.

Applications
The clip is suitable for use in electrical installation, building and industrial technology. It is frequently used to fasten electrical cables, lines or piping to walls, ceilings or other substrates. The size 28 mm makes it particularly suitable for medium-sized cables or pipes with a diameter of approximately 28 mm.

Functions and equipment in detail
The clip is made of steel, ensuring high mechanical strength and durability. The single-lap construction allows for easy installation, with the clip featuring an opening that is closed using a fastening tool. The clip is not suitable for use with gas-powered nail guns when sizes 3 or 4 are used. Additionally, the clip is not intended for use with rivet-setting tools for sizes 3 to 21 mm. These restrictions result from the mechanical requirements of the tools and the clip's construction.

Technology explained simply
The single-lap design means the clip is bent from a single metal strip with an opening. During installation, the clip is slipped over the object to be fastened and closed using a special tool (e.g. a clip crimping tool). The connection is achieved through plastic deformation of the metal, creating a firm and permanent fastening. The choice of steel ensures high strength and resistance to mechanical stress.

Compatibility and accessories
The clip is designed for use with special clip crimping tools intended for processing single-lap clips. Use with gas-powered nail guns is not intended for sizes 3 and 4. Similarly, use with rivet-setting tools for sizes 3 to 21 mm is not recommended.

Installation and mounting
Installation is carried out by slipping the clip over the cable or pipe and then closing it with an appropriate tool. The clip is deformed in such a way that it securely encloses the object and is simultaneously fastened to the substrate.

The clip is designed for use in the electrical and installation industry, where a firm and permanent fastening of cables and pipes is required. The material strength and construction ensure a reliable connection that meets the demands of professional use.

Advantages in operation
The single-lap mounting clip offers quick and secure installation, particularly in electrical installation. The use of steel ensures high mechanical strength, which remains intact even under operational loads. The clip is easy to handle and requires no additional tools other than the special clip crimping tool. The clear size specification (28 mm) enables precise selection for the respective application.