| Features |
| Product type | Power supply |
| Product colour | Metallic |
| Compatibility | M4300-8X8F, M4300-12X12F, M4300-24X24F |
| Logistics data |
| Harmonized System (HS) code | 85177900 |
| Power |
| Total power | 250 W |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
The Netgear APS250W-100NES is a
power supply for network switches of the M4300 series. It serves as a replacement or additional power source and is specifically designed for the models M4300-8X8F, M4300-12X12F, and M4300-24X24F. This component enables redundant power supply, thereby increasing the availability of network devices. The power supply is finished in
metallic and provides a total power output of
250 W. It is designed for use in professional network infrastructures where continuous power supply is critical.
Applications
The APS250W-100NES is used in networks where M4300 series switches are operated. These devices are typically found in data centres, server rooms, or other environments with high requirements for network availability. The power supply is particularly suitable when using a hot-swap function, allowing a faulty power supply to be replaced during operation without shutting down the switch. This is crucial for critical applications where network downtime must be avoided.
Functions and Equipment in Detail
The power supply delivers a maximum output of 250 W and is designed for an input voltage of 100 to 240 V AC. The input frequency is 50 to 60 Hz, enabling worldwide use. Compatibility is limited to the switch models M4300-8X8F, M4300-12X12F, and M4300-24X24F. These models are not equipped with PoE (Power over Ethernet), meaning the power supply serves exclusively to power the switch device itself. The power supply is designed as a replacement part to ensure continuous power supply in case of failure of the primary power supply.
Technology Explained Simply
The power supply operates with a C14 connector, which is standard in network devices of this class. The 250 W output is sufficient to power the respective switch models, which typically do not feature PoE functions. The input parameters (100–240 V, 50–60 Hz) allow use in various countries without modification. The power supply is part of a redundant power system, where two power supplies operate in parallel. If one fails, the other takes over the full load without interrupting operation.
Compatibility and Accessories
The APS250W-100NES is specifically designed for the switch models M4300-8X8F, M4300-12X12F, and M4300-24X24F. These models are not equipped with PoE, which allows the use of this power supply without additional modifications. As accessories, the switch M4300-8X8F XSM4316S-100NES is also available in the range and is compatible with this power supply. The power supply is not a universal replacement part but is intended only for the specified models.
Installation and Mounting
The power supply is integrated into the corresponding switch, with the hot-swap function enabling replacement of the unit during operation. Installation is performed by inserting the power supply into the designated slot of the switch. Connection is made via the C14 connector, which is connected to the network device. No additional tools or connections are required. The power supply is designed for use in enclosed device housings and does not require additional cooling or ventilation.
Operational Advantages
Using the APS250W-100NES increases network reliability, as in the event of a failure of one power supply, operation continues via the second unit. This minimises downtime and protects against data loss or interruptions in critical applications. The hot-swap function allows maintenance work without interrupting network operation, which is particularly beneficial in enterprises with high availability requirements. The universal input voltage (100–240 V) facilitates use in various regions.