Further information for Netgear AGM731F SFP Module 1000Base-SX
Certificates
Compliance certificates
CE, RoHS
Safety
UL 1950, CSA 22.2 No.60 950
Features
Product colour
Silver
Housing material
Metal
Mean time between failures (MTBF)
87658 h
Logistics data
Harmonized System (HS) code
85369010
Operational conditions
Operating temperature (T-T)
0 - 40 °C
Storage temperature (T-T)
-10 - 70 °C
Operating relative humidity (H-H)
10 - 90%
Packaging content
Quantity per pack
1 pc(s)
Performance
SFP transceiver type
Fiber optic
Maximum data transfer rate
1250 Mbit/s
Interface type
SFP
Fiber optic connector
LC
Fiber cable diameters supported (core/cladding)
50/125,62.5/125 µm
SFP transceiver standard
SX
Maximum transfer distance
1000 m
Wavelength
850 nm
Networking standards
IEEE 802.3z
Fiber ethernet cabling technology
1000BASE
Duplex system
Full
Multi-mode fiber (MMF) supported
Ethernet LAN
Power
Input voltage
3.3 V
Power consumption (typical)
0.5 W
Weight & dimensions
Width
57 mm
Depth
13.8 mm
Height
8.5 mm
The Netgear AGM731F is an SFP transceiver module for fibre optic applications, specifically developed for use in managed and smart switches. It enables connection via multimode fibre cables and provides Gigabit Ethernet transmission with a maximum data rate of 1250 Mbit/s. The module is designed to the 1000Base-SX standard, making it particularly suitable for short to medium transmission distances in local networks. It features an LC duplex optical cable connector, designed for connection with fibre cables having a core diameter of 50/125 µm or 62.5/125 µm. These cable types are common in many enterprise networks and enable reliable data transmission over distances up to 1000 metres, with the actual range depending on the fibre optic quality (e.g. OM1, OM3, OM4). The wavelength is 850 nm, typical for short-range multimode systems.
Applications
The module is used in networks requiring high bandwidth and stable connections via fibre cables. It is particularly suitable for expanding switches equipped with SFP slots to complement existing copper networks with fibre connections. Compatibility with a wide range of Netgear switch models such as GSM7312, GSM7324, GS724T, GS748T, FSM7326P, JGS524F and others enables flexible integration into existing infrastructures. The use of fibre optics offers advantages such as low signal loss, high interference resistance, and greater transmission range compared to copper cables.
Features and Equipment in Detail
The AGM731F module is designed as an SFP transceiver, meaning it is inserted into a corresponding slot in a switch and automatically recognised. Installation is performed by simply plugging it into the SFP slot; the associated RJ-45 port is disabled during this process. The module can also be replaced while the switch is operating, ensuring high availability and maintainability. Power supply is provided by the switch system at 3.3 V, with power consumption in standard operation at 0.5 W. The housing is made of metal and is silver-coloured, enabling a robust and long-lasting construction.
Technology Explained Simply
The SFP standard (Small Form-factor Pluggable) enables a compact design, allowing multiple modules to be housed in a single switch. The module operates in full-duplex mode, meaning data can be transmitted simultaneously in both directions without impairing transmission. The IEEE 802.3z standard, which the module supports, defines specifications for Gigabit Ethernet over fibre cables. The maximum transmission distance of 1000 metres applies under optimal conditions with laser-optimised OM4 multimode fibres; with OM3 fibres, the range reaches up to 550 metres, and with OM1 fibres up to 275 metres. The operating temperature ranges from 0 to 40 °C, and the storage temperature from -10 to 70 °C, making the module suitable for environments with moderate temperature fluctuations. Relative humidity during operation is 10 to 90 %, non-condensing.
Compatibility and Accessories
The module is suitable for all Netgear managed and smart switches with SFP-GBIC slots, including models such as GSM7312, GSM7324, GS724T, GS748T, FSM7326P, JGS524F and others. It is not restricted to a single device but can be used in any device supporting the SFP standard. Use with multimode fibre cables requires selecting the correct cable type (50/125 µm or 62.5/125 µm) and appropriate fibre quality (OM1, OM3, OM4) to achieve maximum range. Combining it with suitable fibre cables and a compatible switch enables a scalable network architecture.
Installation and Mounting
Installation is performed by simply inserting the module into the free SFP slot of the switch. A click confirms that the module is securely seated in the slot. Automatic recognition by the switch ensures no additional configuration is required. The module can also be replaced during operation, ensuring high availability. The use of fibre optics requires adherence to safety regulations, particularly with open connectors, as laser radiation may be emitted. Avoiding direct exposure to the eyes is therefore recommended.
Operational Advantages
The AGM731F provides a reliable and high-performance fibre connection with Gigabit Ethernet capabilities. The use of fibre optics enables greater transmission range, lower signal loss, and better interference resistance compared to copper cables. The compact design of the SFP module allows for high port density in a switch. The high MTBF (mean time between failures) of 87658 hours demonstrates the module’s high reliability. Compliance with standards such as CE, RoHS, UL 1950 and CSA 22.2 No.60 950 ensures safety and environmental compatibility. Energy efficiency, with a power consumption of 0.5 W in standard operation, contributes to reduced operating costs.