The ICF-1150-M-ST from Moxa is an industrial media converter that connects serial interfaces (RS-232/422/485) with a multi-mode fiber connection via ST connectors. The device is designed for use in industrial environments where reliable serial communication over long distances is required, particularly in electromagnetically noisy areas. The galvanic isolation of 2 kV protects connected devices from voltage spikes and potential differences, enhancing communication stability.
Applications
The ICF-1150-M-ST is suitable for applications in automation technology, such as in manufacturing, power supply, or building automation, where serial devices need to be connected to a fiber network over long distances. The use of multi-mode fiber enables transmission over several kilometers, with fiber cables offering higher immunity to electromagnetic interference compared to electrical cables. The DIN rail mounting facilitates integration into existing enclosures.
Functions and Features in Detail
The device features two serial ports that can be configured as RS-232, RS-422, or RS-485 (2- or 4-wire) according to requirements. The baud rate can be set between 50 bps and 921.6 kbps, including support for non-standard transmission rates. For RS-485 connections, automatic data direction control (ADDC) is used, eliminating the need for manual data direction control. Configuration of pull-up/pull-down resistors and termination resistors (120 Ω, 120 kΩ, N/A) allows flexible adaptation to various bus topologies and improves signal quality.
Technology Explained Simply
The galvanic isolation of 2 kV separates the electrical potentials between the serial interface and the fiber cable, preventing disturbances caused by ground loops or voltage spikes. The ST connectors are robust and suitable for industrial fiber cables. Power supply is provided via a terminal block with a voltage range of 12 to 48 VDC, including integrated overcurrent and reverse polarity protection to safeguard the device. The operating temperature of 0 to 60 °C allows use in typical indoor industrial environments, while the storage temperature of -40 to 85 °C enables safe storage even under extreme conditions.
Compatibility and Accessories
The ICF-1150-M-ST is compatible with a wide range of serial devices supporting RS-232, RS-422, or RS-485. The use of multi-mode fiber requires compatible fiber cables and possibly additional media converters if connection to other fiber types (e.g., single-mode) is necessary. Signal assignments (TxD, RxD, GND, Tx+/-, Rx+/-) are standardized, enabling straightforward connection to common industrial devices.
Mounting and Installation
Mounting is done via a DIN rail, enabling quick and secure installation in enclosures. Connections for the serial interface and power supply are made via terminal blocks, ensuring a secure mechanical connection. The IP30 protection rating of the housing protects against contact with moving parts and against large solid objects, but not against water or dust. Installation requires no special tools; configuration is performed via physical settings on the device.
Operational Advantages
The ICF-1150-M-ST offers high operational reliability through galvanic isolation and integrated protection functions. The automatic data direction control (ADDC) reduces configuration complexity in RS-485 networks. Support for a wide power supply range (12–48 VDC) increases flexibility when integrating into existing power systems. The MTBF of 792,085 hours (according to Telcordia standard) demonstrates the high reliability of the device. Certifications according to UL 61000-4-2 to -4-8, EN 55032/35, FCC Part 15B Class A, and ATEX Zone 2 confirm suitability for demanding industrial and potentially explosive environments.