Further information for Mitsubishi Q68DAIN analog output module 8 outputs
General
Manufacturer
Mitsubishi
Number of outputs
8
Type of output
Current
System compatibility
SystemQ
Galvanic separation
The Mitsubishi SPS SystemQ analog output module type Q68DAIN is a modular component element for industrial automation systems. It serves as an output module for controlling analog loads in the current range and is used in SPS systems of the SystemQ series. The module features eight independent outputs that are galvanically isolated to ensure high electrical isolation between individual channels and the main system. This isolation reduces interference and increases safety when controlling sensitive or high-power consumers.
Analog output module
The Q68DAIN is specifically designed for outputting analog current signals. It enables precise control of loads that are actuated via current signals, such as positioning motors, heating registers, or other analog-controlled actuators. The galvanic isolation of the eight outputs ensures that interference or voltage fluctuations on one channel are not transmitted to other outputs, thereby increasing the reliability of the entire control system.
Functions and equipment in detail
Galvanic isolation is a central feature that ensures electrical safety and signal quality in industrial operation. The module is intended for use in SPS systems of the Mitsubishi SystemQ family and is mounted in standard plug-in module housings used in typical control enclosures.
Technology explained clearly
Galvanic isolation is achieved through opto-coupled or transformer-based isolation stages that separate electrical potentials between the control and load circuits. This prevents voltage spikes or fault currents from the load circuit from entering the control system. This is particularly important in environments with high electrical interference or when controlling loads with different earth potentials. The eight outputs operate independently, enabling parallel control tasks without mutual interference.
Compatibility and accessories
The module is specifically developed for Mitsubishi SPS systems of the SystemQ series and requires use within a compatible SystemQ control frame. No additional accessories or adapters are required to integrate the module into an existing SystemQ system. The exact plug-in technology and connection types are adapted to the SystemQ standard architecture.
Mounting and installation
Mounting is performed in a standard plug-in module housing within a control enclosure. The module is inserted into the designated plug position and mechanically secured. Electrical connection is made via the integrated terminal clamps at the outputs. Installation requires no additional tools or components, except for the usual aids for control enclosure mounting.
Advantages in operation
Galvanic isolation of the eight outputs increases interference resistance and operational safety. The modular design enables flexible expansion of the control system without requiring a complete system overhaul. Use in SystemQ control systems ensures high compatibility with existing control software and hardware components.