MikroTik RBGPOE-CON-HP

MikroTik RBGPOE-CON-HP PoE converter 48V to 24V

Networks > Router > IP router

MikroTik RBGPOE-CON-HP PoE converter 48V to 24V

Lieske Part No. 102164
Mfg Part No RBGPOE-CON-HP
EAN-Code
Manufacturer MikroTik
Here only 26,74 EUR
31,82 EUR incl. VAT

Further information for MikroTik RBGPOE-CON-HP PoE converter 48V to 24V

General
Output voltage24 V
Maximum output power24 W
Output current1 A
Input voltage42-57 V
Supported PoE standard variantsPassive PoE, Telecom PoE, 802.3af, 802.3at
Ethernet speed10/100/1000 Mbps
Operation temperature-35 to +70 °C
Housing materialMetal
The MikroTik RBGPOE-CON-HP is a Gigabit PoE-Converter, specifically developed for powering RouterBOARD devices via Ethernet cables. It enables the use of 48V PoE sources, regardless of whether they are Passive PoE, Telecom PoE, 802.3af, or 802.3at, to supply RouterBOARD devices with an operating voltage of 8 to 30V. The conversion is achieved by transforming the input voltage of 42 to 57V into a stable output voltage of 24V with a maximum power of 24W (equivalent to 1A at 24V). This PoE-Converter is therefore suitable for connecting existing PoE infrastructures with MikroTik RouterBOARDs that cannot be directly connected to 48V PoE.

Applications

The RBGPOE-CON-HP is used in networks where RouterBOARD devices are to be powered via existing PoE networks without requiring additional power sources or adapters. It is particularly useful in installations where RouterBOARDs are installed at remote locations, such as outdoors, on masts, or in buildings without direct access to power supply. The robust metallic construction and integrated cooling ensure reliable operation even under harsh environmental conditions. The operating temperature ranges from -35°C to +70°C, enabling use in demanding climatic environments.

Features and Equipment in Detail

The converter features two Ethernet ports, with one port for the input voltage (42–57V PoE) and the other for the output voltage (24V). Power supply is via the network cable, with the input side supporting all common PoE standard variants, including Passive PoE, Telecom PoE, 802.3af, and 802.3at. The 24V output voltage is designed for RouterBOARD devices requiring an operating voltage of 8 to 30V. The maximum output power is 24W, sufficient to power even high-performance RouterBOARDs. The integrated cooling ensures efficient heat dissipation to guarantee continuous and stable operational reliability.

Technology Explained Simply

The RBGPOE-CON-HP functions as a voltage converter, stepping down the input voltage of 42 to 57V (PoE) to 24V. This voltage is suitable for most RouterBOARD devices operating in the 8 to 30V range. Power supply is via the Ethernet cable, with PoE technology (Power over Ethernet) enabling the transmission of power and data over a single cable. The integrated cooling and metallic housing construction ensure stable operation even under high loads and temperatures. The Ethernet ports support speeds of 10/100/1000Mbps, ensuring high data transfer rates.

Compatibility and Accessories

The converter is compatible with all RouterBOARD devices requiring an operating voltage of 8 to 30V. The input side supports all common PoE standard variants, including Passive PoE, Telecom PoE, 802.3af, and 802.3at. The 24V output voltage is suitable for most MikroTik RouterBOARDs. The use of shielded Ethernet cables is possible, as the shield connections are integrated into the Ethernet connector, ensuring proper grounding at both ends or at the converter itself. Mounting is done via the integrated mounting holes in the housing, allowing wall mounting.

Installation and Mounting

Installation is done by simply connecting the PoE cable to the input port and the RouterBOARD to the output port. Power supply is via the network cable, eliminating the need for additional power cables. Wall mounting is possible using the integrated mounting holes in the housing. The use of shielded cables is recommended to minimize electromagnetic interference. Installation requires no special tools or additional components.

Operational Advantages

The RBGPOE-CON-HP offers a simple and reliable way to power RouterBOARD devices via existing PoE networks. The robust metallic construction and integrated cooling ensure long service life and high operational reliability. Support for all common PoE standard variants increases flexibility when integrating into existing networks. Wall mounting allows flexible placement, and the use of shielded cables ensures stable data transmission. The operating temperature range of -35°C to +70°C makes the converter suitable for outdoor use as well.

Protection Rating

The metallic construction and integrated cooling indicate a robust design; however, no specific IP rating is specified. Wall mounting and outdoor use are possible, but without a specified protection class.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/102164
qrcode für MikroTik RBGPOE-CON-HP PoE converter 48V to 24V