The Small Form Factor Pluggable (SFP) transceiver is a modular and replaceable component specifically designed for use in compatible active network devices. It offers a compact solution that enables the highest port density per line interface, making it an ideal addition to modern networks. A significant proportion of today’s network products are already equipped with SFP slots, providing users with maximum flexibility in network design. Thanks to its smart design, SFP modules can even be replaced during operation (hot-swap capability) without disrupting the system.

SFP selection depends on the cable type (multimode, single-mode, simplex, or twisted pair) and the required bandwidth. Compliance with the Multi Source Agreement (MSA) and SFF-8472 standards ensures uniform design and optional features such as digital diagnostics.

With a maximum bandwidth of up to 1.25 GBit/s, these SFP transceivers support Gigabit Ethernet as well as Gigabit Fibre Channel. For network requirements ranging from short distances (550 m) to long-range applications (120 km), various models are available, supporting both multimode and single-mode operations.

Technical Specifications:

• Types: SFP for multimode or single-mode
• Connector: LC-duplex or LC-simplex (depending on model)
• Digital Diagnostic Monitoring (DDM): Available in certain models
• Bandwidth: 1063 MBit/s to 1250 MBit/s
• Range: Depending on model, between 550 m and 120 km
• Operating Temperature:
- Standard: 0°C to +70°C
- Extended: -40°C to +85°C (DX models)

• Wavelengths (TX/RX):
- Multimode: 850 nm
- Single-mode: 1310 nm, 1490 nm, 1550 nm

• Protocols: Gigabit Ethernet, Gigabit Fibre Channel

Safety Information:

Warning: Fiber-optic components emit visible and invisible light that can cause permanent eye damage. To prevent injury:

• Never look directly into the outputs of fiber-optic components.
• Cover unused optical ports with protective caps.
• Only activate connections after all ports are properly connected.

Order Information:

Multimode Models:

• MS100200: Multimode 850 nm, LC, 0.55 km, 0°C to +70°C
• MS100200D: With DDM
• MS100200DX: With DDM and -40°C to +85°C

Single-Mode Models:

• MS100210: Single-mode 1310 nm, LC, 10 km, 0°C to +70°C
• MS100210D: With DDM
• MS100210DX: With DDM and -40°C to +85°C
• Additional models with ranges of 25 km, 50 km, 70 km, and up to 120 km available (MS100211 to MS100215DX).

Simplex WDM Models:

• MS100221DXA/B: TX 1310 nm/RX 1550 nm or reverse, 10 km, -40°C to +85°C
• MS100222DXA/B: TX 1310 nm/RX 1490 nm or reverse, 10 km
• MS100223DXA/B: TX 1310 nm/RX 1490 nm or reverse, 20 km
• Additional models available with ranges up to 60 km.

SFP transceivers are the perfect choice for flexible, scalable, and high-performance network solutions that meet the demands of modern IT infrastructures.