The Merten System M USB charger MEG4366-0120 is a device with a mounting frame and claws with 2 USB outputs A+C, which enables the charging of mobile/tablet and notebook devices. The input voltage of this device is 240V. The power consumption is less than 0.1W and the nominal output power of this USB charger is 45W with PD technology. The output voltage and associated current are automatically adjusted by the PD protocol: 5V/3A 9V/3A 12V/3A 15V/3A 20V/2.25A for USB C and 5V 1.5A 7.5W for USB A. In addition, the rated operating voltage of this device is between 100 volts and 240 volts. The output voltage of this device varies between 5 - 20 volts. This USB charger has electronic overload and temperature protection, which increases the level of safety. Fastening is done using screws. The installation box can be embedded flush into the surface. The dimensions are 51 mm wide, 40.7 mm high and 30 mm deep, with an installation depth of 30.8 mm. This USB charger is very robust, with a lifespan of 30,000 hours. It also achieves protection class IK04, which protects against an impact of 0.5 joules. This USB charger achieves IP20 protection against solid objects and liquids. In addition, it complies with directives 2002/95/EC - RoHS Directive, 2002/96/EC - WEEE Directive, 2004/108/EC - Electromagnetic Compatibility, 2006/95/EC - Low Voltage Directive. HS directive, 2002/96/EC - WEEE directive, 2004/108/EC - electromagnetic compatibility, 2006/95/EC - low voltage directive. Since this device is environmentally friendly, it also complies with Regulation (EC) No. 1907/2006. The USB charger is made of PC (polycarbonate) GF10 FR, making it as resistant as possible. It has also received EAC certificate. In addition, it meets the standards EN 60950-1, EN 62684, ETSI EN 301 489-4. The System M series is based on 4 different surfaces and materials. With 9 different design variants and over 280 functions, the system can meet every customer requirement. Sales unit: 1 ST.