medical network separation for wall mounting with Harting push-pull technology

Isolation from the outlet box
Fixed installation, flush mounting
protects medical equipment and patients from excessive leakage in the data network
Harting push-pull technology, up to IP68
Insensitive to shocks
long time available for min. 10 years
Performant: Extreme low attenuation

Passive network isolator MED MI 1005 MB has been specially designed for wall mounting in a medical environment. It allows the electrical network separation for medical electrical equipment and systems directly from the wall.
Once securely mounted in the wall of the insulator is well protected by the casing. Accidental impact can be compensated and the network separator, and the connector of the network cable are undamaged. The network isolator MED MI 1005 MB provides an insulation resistance up to 5 kV, under stress conditions to 10 kV DC for 10 seconds. Together with Harting push-pull technology an absolutely secure connection.
An installation of drivers or additional software is not required with this insulator, since the network isolator MED MI 1005 MB completely transparent behaves in the data network.

Technical data:

Withstand voltage signal and shielding: 5000 V 50/60 Hz for 1 minute .; 10000 V 50/60 Hz for 10 sec.
Throughput: 10/100/1000 MBit / s
Connectors: 2 x RJ45 input / output
Network Specifications: IEEE 803.2 10/100/1000 BaseT, twisted pair, auto-conf (behaves completely transparent on the network)
Material: UL94V-0 / RoHS compliant / SVHC / REACH
Time between failures: 0.21 x 10 ^ 8 (1 error in 21 million hours.)
Standards: IEC 60601-1 (3rd Edition); IEC 60601-1-2, UL 60601 (UL Listed E342310); IEEE 802.3