Version with three-stage switch: When combined with a three-stage switch, the delivery volume can be adjusted: Level 1: 35 m3/h, Level 2: 60 m3/h, Level 3: 100 m3/h. When combined with supply air elements, it can be used for controlled ventilation of apartments. Particularly recommended for use in renovation projects. The speed cannot be controlled. Fan with cover and ISO Coarse 30% (G2) filter for installation in flush-mounted housing ER-UP/G, ER-UPD and ER-UPB.... For one-room or two-room ventilation with a single fan (exception: version H). Easy filter change without tools. Cover can be rotated by +- 5°, allowing compensation if the housing is installed at an angle. The fan can be installed quickly and easily in the housing using the snap-on fastening and the electrical plug connection. Color: traffic white, similar to RAL 9016. All MAICO ER devices comply with protection class IP X5 and can therefore be installed in area 1 according to DIN VDE 0100-701, even with water jets. For details, see planning information. Protection class II. The extremely steep characteristic curve shows the high pressure capacity of the ER fans. Robust energy-saving capacitor motor. Motor with thermal overload protection. Maintenance-free, with ball bearings closed on both sides. Volume flow characteristic curve and leakage air rate tested by TÜV Bayern eV Leakage air volume flow < 0.01 m3/h. Shaft level difference in accordance with DIN 52210-6, tested by IAB Oberursel. With VDE mark.Article: ER 100 D, Design: Design with three-stage switching, Delivery volume: 35 m3/h / 60 m3/h / 100 m3/h, Speed: 850 1/min / 1250 1/min / 1900 1/min, Air direction: Ventilation, Speed controllable: no, SEC average: -9.95 kWh/(m2*a), Voltage type: Alternating current, Rated voltage: 230 V, Mains frequency: 50 Hz, Power consumption: 10 W / 21 W / 29 W, IMax: 0.1 A / 0.12 A / 0.14 A, Protection class: IP X5, Mains cable: 5 / 1.5 mm2, Installation location: Wall / ceiling, Installation type: Flush-mounted, System type: decentralized, Material: Plastic, Color: traffic white, similar to RAL 9016, Weight: 1.51 kg, weight with packaging: 1.8 kg, filter class: ISO Coarse 30% (G2), blow-out direction: side, width: 250 mm, height: 250 mm, depth: 150 mm, width with packaging: 280 mm, height with packaging: 280 mm, depth with packaging: 155 mm, conveying medium temperature at IMax: 40 °C, sound pressure level: 27 dB(A) / 36 dB(A) / 45 dB(A) / specification according to DIN 18017-3 with an equivalent absorption area AL = 10 m2, nominal width: 75 mm / 80 mm