The LUPUS 1 channel relay with ZigBee repeater is
used to activate and deactivate third-party devices (smart home functions).
For example, you can connect lamps, switches, valves for underfloor heating or irrigation and configure them so that the relay
is activated in the event of an alarm or time/temperature-controlled.
It is also possible to activate the relay remotely, for example with your smartphone. Due to its small dimensions, the flush-mounted relay fits into almost any electrical box behind e.g. B. Your power switches.
These can in turn be connected to the relay so that the switches can still be used. The built-in repeater function amplifies the signals from a maximum of 40 ZigBee devices within range.

Highlights

• 1 channel wireless relay enables time/temperature-dependent control or control via smartphone or software
• Can pass on the alarm status to BUS systems
• With ZigBee repeater
• Amplifies up to 40 ZigBee products
• Wireless transmission, 230 V connection
• Very small Built-in housing

Product type

• Sensor/actuator
• ear category (ElektroG): relevant, Category 5: Small devices < 50 cm (all sides), small devices B2C

Data transmission

• Radio standard: ZigBee

Basic properties

• Color: White
• Height: 37.79 mm
• Length / Depth: 20.5 mm
• Width: 42.29 mm
• Weight: 40 g

Scope of delivery

• LUPUS 1 channel relay
• manual