The LUPUSEC temperature sensor with external sensor measures the temperature with a probe at the end of the included 3 meter long cable and sends every temperature change directly to the smart home alarm system every 10 minutes. This means you can check the temperature at the sensor location at any time, even when you're on the go. The temperature sensor is battery-operated (approx. 4.5 years battery life) and is in radio contact with the alarm system within the radio range.
Cables for signal transmission or a power supply via power supply are NOT necessary. This means you can control shading (roller shutters or blinds), open or close radiator thermostats or underfloor heating valves, and activate air conditioning units and fans depending on the temperature. This means you not only save on heating costs, but you also always enjoy a pleasantly warm home.

Highlights

• Temperature sensor with external sensor (3 meter cable length)
• Sends the temperature at the sensor to the alarm system every 10 minutes
• Battery lifespan 4.5 years
• Detects temperatures from -35 to 65 degrees Celsius
• Very easy installation
• Switching surface-mounted and flush-mounted relays (radio-controlled sockets ) at certain temperatures
• Works in the 2.4 GHz range -
• Not compatible with the radio repeater

Product type

• Sensor/actuator
• ear category (ElektroG): relevant, Category 5: Small devices < 50 cm (all pages), small devices B2C

Power supply

• Battery

Data transmission

• Radio standard: ZigBee

Basic properties

• Color: White
• Height: 25.2 mm
• Length/depth: 113.5 mm
• Width: 27 mm

Scope of delivery

• LUPUSEC
• temperature sensor with sensor
• CR123 3V lithium battery
• screws and dowels
• manual