LTC

LTC H07V-K 2,5 SW Cable 2.5 mm² black

Cables > Installation systems and industrial management > Wiring cable H05 / 07V-K

LTC H07V-K 2,5 SW Cable 2.5 mm² black

Lieske Part No. 544356
Mfg Part No
EAN-Code
Manufacturer LTC
Here only 81,45 EUR
96,93 EUR incl. VAT

Further information for LTC H07V-K 2,5 SW Cable 2.5 mm² black

General
Nominal voltage450/750 V
Test voltage2500 V
Operation temperature+70 °C
Installation temperature range+5 to +70 °C
Temperature range after installation-30 to +70 °C
Bending radius15 x cable diameter
Flame retardancyVDE 0472 T. 804, test type B (IEC 332-1)
Conductorbare copper, fine-stranded
InsulationPVC according to VDE 0207
Sheath colourin accordance with VDE 0293
The PVC-insulated single-core cable H07V-K 2.5 SW from LTC is an installation cable designed for use in dry indoor environments, particularly in control and distribution systems. It is suitable for installation in conduits, both above and below plaster, as well as in closed installation channels. The cable is used for internal wiring of devices, control panels, and distributors, as well as for protected installation in and on lighting fixtures. The maximum rated voltage is 1000 V AC or 750 V DC to earth. Direct installation on trays, troughs, or channels is not intended.

Applications
This cable is designed for use in electrical installations indoors, where protected routing is ensured. It is commonly used in residential and commercial buildings to connect electrical devices, lighting systems, and distributors. Installation takes place in closed conduits or channels to minimize mechanical stress and environmental influences. The cable is not intended for outdoor use or for direct installation in damp or wet environments.

Functions and Features in Detail
The cable consists of a fine-stranded, bare copper conductor, ensuring high electrical conductivity. Insulation is provided by PVC in accordance with VDE 0207, ensuring good electrical insulation and mechanical stability. The sheath color complies with VDE 0293 standards, ensuring uniform color coding for electrical wiring. The cable is designed for a maximum operating temperature of +70 °C, enabling safe use under normal operating conditions.

Technical Explanation
The rated voltage of 450/750 V means the cable is designed for electrical systems with up to 450 V between conductors and up to 750 V between a conductor and earth. The test voltage of 2500 V serves as a safety margin to test insulation under high voltage conditions. The installation temperature range is between +5 °C and +70 °C; after installation, the cable can be operated at temperatures from -30 °C to +70 °C. The minimum bending radius is 15 times the cable diameter to prevent damage to the conductor. Flame retardancy according to VDE 0472 T. 804, test method B (equivalent to IEC 332-1), ensures limited flame spread in case of fire, enhancing safety in electrical installations.

Compatibility and Accessories
The cable is designed for use in standard installations and can be combined with common installation materials such as conduits, cable ducts, and connection components. It is compatible with electrical devices requiring a rated voltage up to 1000 V AC or 750 V DC. Use in lighting fixtures and distributors is standard, provided installation occurs in protected areas.

Installation and Mounting
Installation is carried out in closed conduits or channels, ensuring minimum bending radii are observed to avoid damaging the conductor. Installation must take place in dry rooms, and the cable must not be laid directly on trays, troughs, or channels. The installation temperature must be between +5 °C and +70 °C to ensure proper handling.

Operational Advantages
The cable offers high electrical conductivity due to the fine-stranded copper conductor and reliable insulation via PVC. Flame retardancy according to VDE 0472 T. 804, test method B, increases safety in case of fire. High mechanical stability and a small bending radius facilitate installation in complex routing situations. The cable is suitable for standard indoor installations and meets the required standards for electrical systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/544356
qrcode für LTC H07V-K 2,5 SW Cable 2.5 mm² black