| General |
| Nominal voltage | 300/500 V |
| Test voltage | 2000 V |
| Installation temperature range | +5 °C - +70 °C |
| Temperature range after installation | -30 °C - +70 °C |
| Operation temperature | +70 °C |
| Bending radius | 15 x cable diameter min. |
| Flame retardancy | According to VDE 0472 T. 804 test type B (IEC 332-1) |
| Conductor | bare copper, fine-stranded |
| Insulation | PVC according to VDE 0207 |
| Sheath colour | in accordance with VDE 0293 |
The H05V-K 1.0 SW is a flexible PVC wiring cable from manufacturer LTC, designed for internal wiring of devices as well as for protected installations in and on luminaires, in conduits, on and under plaster. The cable is specifically designed for use in doorbell and signaling systems. It features a bare, fine-stranded copper conductor and PVC insulation in accordance with VDE 0207, with the sheath color defined according to VDE 0293. The cable is rated for a nominal voltage of 300/500 V and has a test voltage of 2000 V, ensuring high electrical insulation performance.
Applications
This cable is suitable for use in electrical devices, lighting systems, and protected installations within buildings. It is intended for use in doorbell and signaling systems, meaning it is designed for applications with low voltage and low power. Installation takes place in protected areas, for example in conduits, under plaster, or in luminaires, with the ambient temperature during installation ranging between +5 °C and +70 °C. After installation, the cable can be operated at temperatures from -30 °C to +70 °C.
Functions and Features in Detail
The conductor is made of bare, fine-stranded copper, ensuring high flexibility and good electrical conductivity. The PVC insulation provides reliable protection against electrical voltages and is specified according to VDE 0207. The sheath color complies with VDE 0293 standards, ensuring uniform color coding and thus easy identification of the cable during installation. The maximum operating temperature is +70 °C, making the cable suitable for use in indoor environments with normal ambient temperatures.
Technical Explanation
The nominal voltage of 300/500 V means the cable is designed for alternating voltages up to 300 V and direct voltages up to 500 V. The test voltage of 2000 V serves as a safety margin and ensures the insulation remains stable even under increased voltage. The minimum bending radius is 15 times the cable diameter, allowing flexible installation without damaging the conductor. The flame retardancy according to VDE 0472 Part 804, Test Method B (equivalent to IEC 332-1), indicates that the cable is only limitedly flammable and does not propagate live flames, enhancing safety in buildings.
Compatibility and Accessories
The cable is intended for use in doorbell and signaling systems, with installation required in protected areas. It is not intended for use in open, unprotected areas or outdoors. Installation in conduits, under plaster, or in luminaires is permitted, provided ambient conditions do not exceed the specified temperature ranges.
Installation and Mounting
Installation takes place in protected areas, with the cable being routed in conduits, under plaster, or in luminaires. Installation must occur at temperatures between +5 °C and +70 °C to ensure optimal processing and functionality. The minimum bending radius of 15 times the cable diameter must be observed to avoid damaging the copper braid. The cable is intended for use in doorbell and signaling systems, with electrical requirements of these systems to be considered.
Operational Advantages
The flexible PVC insulation and fine-stranded copper conductor enable easy and safe installation. The high test voltage and flame retardancy according to VDE 0472 Part 804, Test Method B, ensure enhanced safety during operation. The cable is designed for indoor use and provides reliable electrical conduction under normal ambient conditions. Adhering to the specified temperature ranges and installation conditions ensures long service life and stable performance.