| General |
| Operating voltage | 230 V |
| Frequency | 50 Hz |
| Number of channels | 2 |
| Switching time | 1 to 60 minutes |
| Shortest switching sequence | 30 minutes |
| Switching output | 2 change-over contacts |
| Mounting method | EN 60715 rail or surface mounting |
| Motor type | Synchronous motor |
| Gear accuracy | synchronous with mains |
The Legrand PolaRex KKT, type 49926, is an analogue time switch for use in electrical installations. It features a synchronous motor, ensuring network-synchronised timing accuracy, and is designed for operation at 230 V, 50 Hz. The time switch is designed for two channels and enables time-controlled operation of two independent loads. It is suitable for applications requiring a daily, repeating switching sequence, for example in lighting systems, heating controls, or industrial automation.
Applications
The time switch is intended for indoor use and can be mounted on a support rail in accordance with EN 60715 or installed surface-mounted. Dimensions are 113.7 mm in height and 72 mm in width, making it suitable for standard installation enclosure configurations. The daily disc allows visual programming of switching times over a 24-hour cycle. The time switch is designed for operation in electrical systems with a supply voltage of 230 V 50 Hz.
Functions and Equipment in Detail
The time switch features adjustable short-time programmes, with switching times adjustable between 1 and 60 minutes. The shortest switching sequence, i.e. the time interval between the start of one switching time and the start of the next, is 30 minutes. This enables flexible, yet non-continuous, control of loads. The switching outputs consist of two changeover contacts, each enabling a switching operation for one load. The daily disc serves for visual representation and programming of switching times.
Technology Explained Simply
The synchronous motor of the time switch is connected to the power grid and synchronises with the 50 Hz frequency. This achieves high timing accuracy, independent of external time sources. The analogue time switching is performed via mechanical components that move the daily disc in a 24-hour rhythm. Switching operations are triggered by the position of the daily disc and the set switching times. The time switch is not battery-operated and requires no additional power supply other than the operating voltage of 230 V.
Compatibility and Accessories
The time switch is designed for mounting on a support rail in accordance with EN 60715, enabling standard installation in electrical enclosures. Alternatively, it can also be installed surface-mounted. The switching outputs (2 changeover contacts) are designed for controlling loads in the electrical network.
Installation and Mounting
Mounting is either on a support rail in accordance with EN 60715 or in a surface-mounted installation. Dimensions of 113.7 mm (height) and 72 mm (width) correspond to common size standards for modular installation devices. The time switch must be connected to a 230 V 50 Hz mains supply. The switching outputs are configured as changeover contacts, enabling flexible wiring of loads.
Operational Advantages
The time switch provides reliable, mechanical time control without dependence on electronic or battery-operated components. The network-synchronised timing accuracy ensures high precision of switching times. Simple operation via the daily disc and adjustable short-time programmes allow flexible adaptation to various applications. The time switch is designed for use in electrical systems with 230 V 50 Hz and requires no additional power supply.