| General |
| Cross section | 16 mm² |
| Total length | 500 mm |
| Thread | M6 |
| Colour | Green-yellow |
| Application | Switchgear construction |
The earthing strap of the brand Lapp, type 1x16/M6/500mm GN/YE, is a component specifically designed for use in enclosure construction for safe protective earthing. It serves as a connecting element between electrical devices, enclosures, and the earthing system, ensuring a safe discharge path for fault currents in the event of a fault. Protective earthing is a mandatory measure according to applicable standards to prevent electrical hazards. The strap is finished in green-yellow, which according to DIN VDE 0100-510 is the designated marking for protective conductors, enabling clear identification in plant construction.
Applications
The earthing strap is primarily used in the field of enclosure construction, where reliable and durable earthing of electrical components is required. It is suitable for connecting enclosure housings, power electronics, control systems, and other electrical assemblies to the plant’s earthing system. Its use in industrial environments, such as manufacturing automation or power supply, is typical, as these areas demand high safety requirements for electrical installations.
Functions and Equipment in Detail
The earthing strap features a cross-sectional area of 16 mm², ensuring sufficient current discharge for fault currents. The total length is 500 mm, allowing flexible use in various enclosure configurations. At both ends, the strap is fitted with M6 threads, enabling secure mechanical fastening to corresponding screw connection points. The green-yellow colouring corresponds to the international marking for protective conductors and supports compliance with safety regulations.
Technology Explained Simply
The function of the earthing strap is based on discharging fault currents via a low-impedance conductor path to earth. In the event of an insulation fault in the electrical system, the fault current flows through the earthing strap, minimizing the risk of electric shock to personnel or damage to equipment. The cross-sectional area of 16 mm² ensures that even under high fault currents, no overheating or mechanical damage to the strap occurs. The M6 threaded connections allow for a secure and durable connection that remains stable even under mechanical stress.
Compatibility and Accessories
The earthing strap is designed for use in enclosures equipped with corresponding M6 screw connection points. It can be combined with other earthing elements, such as earthing rails or earthing terminals, to create a complete earthing system. The standardized green-yellow colouring enables clear identification with the protective conductor, supporting compliance with standards such as DIN VDE 0100-510.
Installation and Mounting
Installation is carried out by screw connection at the designated earthing points within the enclosure. The M6 threaded connections require a suitable screwdriver or electric screwdriver. The fastening must be tight and without play to ensure a low-impedance connection. The total length of 500 mm allows flexible positioning within the enclosure, with the connection path ideally kept as short and straight as possible to minimize impedance.
Advantages in Operation
The earthing strap provides a reliable and durable earthing solution that enhances operational safety. The standardized green-yellow colouring facilitates identification and maintenance. The robust construction with a 16 mm² cross-section and M6 threads ensures long service life and high mechanical stability. Compliance with protective earthing standards is supported by the colouring and technical specifications, ensuring the plant’s conformity with legal requirements.