Minimum bending radius in mm, occasionally flexing
139.2 mm
Temperature, fixed installation
-40 °C to 85 °C max. conductor temperature
Temperature, fixed installation min
-40 °C
Temperature, fixed installation max
85 °C
Temperature, occasionally moved
-25 °C to 85 °C max. conductor temperature
Temperature, occasionally moved min
-25 °C
Temperature, occasionally moved max
85 °C
Installation temperature min.
-20 °C
Storage temperature min.
-20 °C
Max. storage temperature
40 °C
Flame retardance according to
IEC 60332-1-2
UV-resistant according to
EN 50525-1 (cables with a black sheath are suitable for permanent outdoor use)
For torsional load
Flame-retardant
UV-resistant
Halogen-free
Oil-resistant
PWIS-free
Permanently immersible in water
Product design
Harmonised design
H01N2-D
Cable dimensions
1X150
Nominal conductor cross-section (metric)
150 mm²
Conductor material
Bare copper
Conductor design
EN 50525-2-81 H01N2-D
Number of cores
1
Min. outer diameter
21.1 mm
Max. outer diameter
23.2 mm
Cable shape
Round
Basic material of outer sheath
Rubber
Outer sheath colour
black
Including protective earth
Shielded
Connecting cable H01N2-D 1X150 500 M, connecting cable, 1X150, HAR-certified, U0/U: 100/100 V, rubber, flexible, areas of application: Can be used outdoors for a limited time, For connecting arc welding equipment and hand-held electrode holders up to 100 V nominal voltage, Flexible use possible at temperatures as low as -25 °C, Can be used in dry, damp and especially in rough and oily environments, Withstands high mechanical loads, For flexible use, free in the air, without tensile stress, Benefits: Manufactured according to the harmonized European design H01N2-D, with the HAR" marking for tested safety and quality, "HAR cables are widely accepted and used in Europe, Safe transmission of high currents thanks to flexible and robust cable construction