KOPP 141916019, EAN: 4008224372251

KOPP 141916019 angled plug PRCD-S IP44 16 A

Energy > Schuko plugs, couplings

KOPP 141916019 angled plug PRCD-S IP44 16 A

Lieske Part No. 816132
Mfg Part No 141916019
EAN-Code 4008224372251
Manufacturer KOPP
Here only 385,17 EUR
458,35 EUR incl. VAT

Further information for KOPP 141916019 angled plug PRCD-S IP44 16 A

General
Degree of protectionIP44
Operating voltage230 V
Nominal current16 A
Frequency50 Hz
Rated residual current0,03 A
Switching type3-pole switching
Cable plug side15 cm
Cable coupling side300 cm
Cable typeH07RN-F3G1,5 mm²
Connector typefull rubber angled plug
Coupling typeFull rubber coupling 3-way with caps
Shipping packagingrobust case
Earth conductor monitoringYes
The KOPP PRCD-S, type 141916019, is a 3-pole switching residual current circuit breaker with integrated protective conductor monitoring, specifically designed for use in areas with increased humidity or splashing water influence. The device features a protection rating of IP44, meaning it is dust- and splash-proof, making it suitable for indoor use as well as in damp environments such as workshops, garages, or outdoor areas. The PRCD-S is designed for an operating voltage of 230 V, a rated current of 16 A, and a frequency of 50 Hz. The rated residual current is 0.03 A (30 mA), corresponding to type A, ensuring rapid disconnection upon detection of a dangerous residual current.

Residual current circuit breaker with protective conductor monitoring
The PRCD-S continuously monitors the protective conductor (PE conductor) and disconnects the circuit if an interruption or high resistance in the protective conductor is detected. This increases operational safety, as a defective protective conductor can lead to dangerous touch voltages. The 3-pole switching ensures that all three conductors (L, N, PE) are disconnected simultaneously, guaranteeing a safe disconnection of the circuit.

Applications
The device is suitable for industrial, commercial, and private applications, particularly in environments with increased humidity or splashing water exposure. The IP44 protection rating makes it suitable for use in outdoor areas, workshops, garages, or kitchens where a certain degree of weather resistance is required. The integrated protective conductor monitoring is especially important in installations where safety depends on an intact earthing system.

Functions and equipment in detail
The PRCD-S is delivered in a robust case that protects the switch from mechanical damage. The connection side features a solid rubber angle plug, enabling a secure and weather-resistant connection. The coupling side includes a 3-way solid rubber coupling with caps that protect the plug connections from dust and moisture. The caps can be removed to access the plug connections and reseal tightly afterwards.

Technology explained simply
The cable on the plug side has a length of 15 cm, while the cable on the coupling side is 300 cm long. This allows for flexible positioning of the switch, with the longer side suitable for connecting to multiple consumers or devices. The cable used is type H07RN-F3G1,5 mm², indicating a flexible, oil- and heat-resistant cable type with three conductors (L, N, PE) and a cross-section of 1.5 mm² per conductor. This cable type is suitable for indoor and outdoor use and offers high mechanical and thermal load capacity.

Compatibility and accessories
The PRCD-S is compatible with standard Schuko sockets and plugs. The 3-way coupling allows simultaneous power supply to up to three devices. The use of solid rubber plugs and couplings ensures high mechanical stability and weather resistance. The IP44 protection rating allows use in environments that do not need to be fully waterproof but require protection against splashing water and dust.

Installation and mounting
Installation is carried out by simply inserting the angle plug into a suitable socket. The coupling side can be connected to any Schuko socket, with the 300 cm long cable enabling flexible positioning. The coupling caps are removable to access the plug connections and reseal tightly afterwards. The protective conductor monitoring operates automatically as soon as the switch is turned on.

Advantages in operation
The PRCD-S offers high safety through integrated protective conductor monitoring and 3-pole switching. The IP44 protection rating enables use in damp environments, and the robust design with solid rubber plugs and couplings ensures a long service life. The combination of a short plug cable (15 cm) and a long coupling cable (300 cm) provides flexibility in positioning and cabling. The use of H07RN-F3G1,5 mm² cables ensures reliable power supply even under demanding conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/816132
qrcode für KOPP 141916019 angled plug PRCD-S IP44 16 A