This 16-port Gigabit Ethernet PoE+ switch with 2 SFP ports from Intellinet Network Solutions is equipped with a front panel LCD display that provides real-time PoE power information. This includes the power consumption per connected PoE device, the total power consumption of all PoE devices and the remaining PoE power budget. In addition, the display warns of potential for overcharging, overheating and short circuit. Ideal for security applications with multiple PoE cameras and much more - Power and data connection for up to 16 PoE network devices
Saves time and installation costs by transmitting data and power over the existing network cables
10/100/1000 Auto -Sensing ports automatically detect the optimal network speed
LCD display for easy real-time PoE status control
IEEE 802.3at/af-compliant RJ45 PoE/PoE+ outputs
Output power up to 30 watts per port*
PoE power budget 370 watts
Two GBIC -Module slots (SFP)
Supports IEEE 802.3at and IEEE 802.3af compliant PoE devices (wireless access points, VoIP phones, IP cameras)
Supports IEEE 802.3at/af detection and short circuit, overcharge protection and overvoltage
Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
The power-saving Green Ethernet technology deactivates unused ports and adjusts the energy level according to the cable length
All RJ45 ports support Auto-MDIX (Auto Uplink)
36 Gbit /s switching capacity
Store-and-forward architecture
IEEE 802.3x flow control at full duplex
Supports up to 8192 MAC addresses
512 Kbytes of buffer memory
Two high-performance fans ensure perfect cooling and air circulation
48,3 cm ( 19 inch ) mounting bracket included
Fully NDAA Compliant
3 Year Warranty Standards
IEEE 802.3 (10Base-T Ethernet)
IEEE 802.3ab (Twisted Pair Gigabit Ethernet)
IEEE 802.3af (Power over Ethernet 802.3at Type 1)
IEEE 802.3at (Power over Ethernet 802.3 at Type 2)
IEEE 802.3az (Energy Efficient Ethernet EEE)
IEEE 802.3u (100Base-TX Fast Ethernet)
IEEE 802.3x (flow control for full duplex mode)
General:
Supported media:
100Base-TX Cat5 UTP/STP RJ45
1000Base-T Cat5e UTP/STP RJ45
Packet Filter/Forwarding Rate:
1,488,000 pps (1,000 Mbps)
148,800 pps (100 bps))
14,880 pps (10 Mbps))
MAC address table: 8192 entries
Cache: 512 KByte
Backplane speed: 36 Gbit/s
Store-and-forward architecture
MTBF: 144,000 hours
Display:
Type: LCD
Resolution: 128 x 64 pixels
Display area: 43 mm x 23 mm
Cooling
2 x fans
Air flow: 6.76 CFM
Pin assignment RJ45 output ports (data + power)
IEEE Alternative A
Pin 1: Vport [+]
Pin 2: Vport [+]
Pin 3: Vport [-]
Pin 4: Not used
Pin 5: Not used
Pin 6: Vport [-]
Pin 7: Not used
Pin 8: Not used
Certificates: FCC Class A, CE, RoHS
LEDs
Power
PoE
Link/Activity/Speed
power
Input: 100 - 240 V AC, 50 - 60 Hz
Power consumption: 420 watts (max.)
Physical specifications
Metal housing
Dimensions (L x W x H): 208 x 440 x 45 mm
Net weight: 3 kg
Gross weight: 3.77 kg
Environment
Operating temperature: 0 - 45° C
Humidity: 10% - 90% RH , non-condensing
Storage temperature: -10 - 70°C
Scope of delivery
16-port Gigabit Ethernet PoE+ switch with 2 SFP ports
Power cable
Manual
48,3 cm ( 19 inch ) mounting bracket Color: Black Product dimensions: 208 (L) x 440 (W) x 45 (H) [mm]