Data transmission
Switching capacity	52 Gbit/s
Forwarding rate	38.69 Mpps
MAC address table	8000 entries
Jumbo frames	9216
Packet buffer memory	4.1 MB
Store-and-forward
Jumbo frames support
Design
Form factor	1U
Product colour	Black
Housing material	Metal
LED indicators	Activity, Link, PoE, Power
Number of fans	3 fan(s)
Rack mounting
Network
Networking standards	IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10BASE-T, 100BASE-TX, 1000BASE-T
Cable types supported	Cat3, Cat4, Cat5, Cat5e
Ethernet LAN data rates	10,100,1000 Mbit/s
10G support
Full duplex
Flow control support
MAC address auto-learning supported
VLAN support
Operational conditions
Operating temperature (T-T)	-10 - 60 °C
Storage temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	10 - 90%
Storage relative humidity (H-H)	5 - 90%
Optical fiber
Fiber ethernet cabling technology	1000BASE-SX
Other features
Dimensions (WxDxH)	440 x 39.58 x 230 mm
Ethernet interface type	Fast Ethernet, Gigabit Ethernet
Ethernet LAN (RJ-45) ports	24
Packaging content
Cables included	AC
Manual
Packaging data
Package width	320 mm
Package depth	495 mm
Package height	74 mm
Package volume	11800 cm³
Package weight	3.7 kg
Performance
Maximum data transfer rate	1000 Mbit/s
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity	24
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
SFP module slots quantity	2
Fiber optic connector	SFP
Power
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity	24
Power over Ethernet (PoE) power per port	32 W
Total Power over Ethernet (PoE) budget	380 W
Power over Ethernet (PoE)
Technical data
Transmission speed	10/100/1000Mb/s
Number of ports	24
Width packaging	0.320m
Article width	23.00cm
Type	19" switch
PoE	PoE+
Height packaging	0.074m
Article height	4.70cm
Weight	3.958kg
Packaging volume	0.0118m³
Net weight	3.700kg
Article length	44.00cm
Fibre optics	2x SFP
Length packaging	0.495m
Fans
Managed
Weight & dimensions
Width	440 mm
Depth	39.6 mm
Height	230 mm
Weight	4.7 kg

PoE+ switch with 24 ports and LC display for efficient network power supplyComprehensive PoE power supply: Up to 32 W per port according to IEEE 802.3af/at, PoE budget 380 W for up to 24 end devices.
Direct control on the LC display: Per-port status in real time and settings for mode, prioritization and port power.
Gigabit uplinks via fiber: 2x SFP reliably connect remote segments.
High packet performance under load: 52 G switching capacity, 38.69 Mpps and jumbo frames 9216 bytes.
More safety in operation: Protection against overload, overvoltage and overheating per port, surge protection ± 6 kV.
With this PoE+ Gigabit switch you expand your network with reliable power over Ethernet while creating flexible uplink options. You operate IP cameras, wireless access points and other PDs directly via the network cable and reduce additional cabling and outlet requirements. A PoE budget of 380 W and up to 32 W per port provides reliable power, while two SFP slots enable Gigabit connections over longer distances.
In professional IT environments and on-site installations, the LC display accelerates setup and monitoring. Mounting in a 19 inch rack (1 U, mounting brackets included) fits ideally into existing infrastructures of companies and public institutions as well as in service deployments; selectable modes such as Normal, VLAN and CCTV support port isolation, prioritized power and distances up to 250 m at 10 Mb/s.
Ports: 24x 10/100/1000Base-T RJ45 (Auto-MDI/MDI-X), 2x SFP 1000 Mb/s
PoE: IEEE 802.3af/at, ports 1-24, up to 32 W per port, budget 380 W
Total power: 420 W
Display: LC display (PoE operating status), LEDs: PWR, LNK/ACT PoE
Switching capacity: 52 G
Forwarding rate: 38.69 Mpps
Jumbo frame: 9216 bytes
Packet buffer: 4.1 Mbit
MAC table: 8 K, automatic learning, automatic updates
Forwarding method: store-and-forward
Operating modes: Normal, VLAN (port isolation with uplink communication), CCTV (up to 250 m at 10 Mb/s)
PD features: type selection (Advanced/Standard/Legacy), reboot per port
PSE features: power allocation, port prioritization (high/medium/low), port power 8-32 W in 2 W steps, port on/off
Fan control: always on, 20 % PB, 40 % PB
Standards: IEEE 802.3, 802.3u, 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
Network cables: 10BASE-T UTP category 3/4/5 (Number of fans: 3
Dimensions: 440 x 232 x 45 mm
Weight: approx. 3.7 kg
Power supply: 100-240 V AC, 50/60 Hz
Environment: operation -10-60 °C; storage -40-70 °C; humidity operation 10-90 % non-condensing; storage 5-90 % non-condensing
Surge protection: ± 6 kV