| General |
| Degree of protection | Outdoor use |
| Sensor | ATMEL FingerchipTM |
| Lifespan | ˃ 2 million operations |
| Operating voltage | 8-12 V AC/DC |
| Relay voltage | 24 V AC/DC |
| Relay current | 1,0 A |
| Temperature range | -20° C - +70° C |
| Recommended mounting height | ca. 130 cm |
| Memory capacity | 150 Fingerprints (templates) |
| Power failure protection | Data remains stored |
The BioKey Gate from Idencom is a finished product for access control systems, consisting of two separate units: an outdoor unit with a fingerprint sensor and an indoor unit with the door opener control (relay). This separation enhances security, as the control electronics are installed in the protected indoor area and thus protected against manipulation. The outdoor unit is mounted next to the door, while the indoor unit is installed at a secure location inside the building. The connection between both units is made via a cable, supporting a length of over 10 meters.
Applications
This system is suitable for outdoor use, as confirmed by the specified outdoor application. It is appropriate for access control in buildings requiring high security, such as office buildings, industrial facilities, or residential complexes. The operating temperature range of -20 °C to +70 °C allows use under various climatic conditions, even at extreme temperatures.
Functions and Equipment in Detail
The fingerprint sensor is based on a robust Atmel line sensor (Fingerchip™), designed for a lifespan of over two million uses. The outdoor unit is integrated into a housing with a stainless steel finger guide, featuring a modern design. Operation is performed without a PC using a master finger concept, meaning no special knowledge is required. The storage capacity is 150 fingerprints (templates), with data retained even during power failure and not lost.
Technology Explained Simply
The outdoor unit recognizes the fingerprint via the Atmel sensor and transmits the data via cable to the indoor unit. The indoor unit contains the relay, which triggers the door opening upon successful authentication. The operating voltage for the outdoor unit is between 8 and 12 V AC/DC, while the relay operates at 24 V AC/DC with a current consumption of 1.0 A. The power failure protection ensures that stored user data remains intact even if the power supply is interrupted.
Compatibility and Accessories
The system is designed for use with existing door opener systems that support a 24 V AC/DC interface. The connection is made via a cable, with a maximum length exceeding 10 meters.
Installation and Mounting
The outdoor unit is mounted on the wall next to the door, with a recommended installation height of approximately 130 cm. The indoor unit is installed at a protected location inside the building. Installation requires no special tools or knowledge, as the assembly is described as extremely simple. The wiring between the units is done via a separate cable.
Operational Advantages
The system provides high security through the separation of sensor and control, preventing manipulation of the outdoor sensor from opening the door. The power failure protection ensures that access data is not lost. User-friendliness is supported by the master finger concept, which functions without PC support. The robust construction with stainless steel finger guide and a lifespan of over two million uses ensures long-term durability.