The PoE Pro with Bluetooth increases the significance of the measurements and documents the proper functioning of the PoE supply during installation, maintenance and troubleshooting of network cables. The test results are saved in real time on the mobile device using the free AnyWARE Cloud app and can then be seamlessly transferred to the AnyWARE Cloud to create professional PDF reports. Until now, technicians had to know the individual standards, output power and cable lengths of PoE to ensure that a connected device could operate properly. The PoE Pro recognizes the power class of the PoE source (supplier) and the power provided to the PoE device (consumer) - regardless of the cable length, cable quality and other factors. It gives a clear OK/error result evaluation in accordance with the IEEE 802.3af/at/bt standards. The PoE Pro detects switch data rates of 10M/100M/1G/2.5G/5G/10G to test switch configurations and ensure the desired network rate at the location of the installed device. In addition to PoE testing and fault diagnosis with reporting function via the AnyWARE Cloud App, the TDR technology allows you to quickly locate opens and shorts on the cable, the compact tester supports wiring testing, port flashing, detects analog (PBX) and digital (ISDN) telephone services, multimedia support RJ-45, RJ-11/RJ-12 and coaxial connectors for checking copper low-voltage cables as well as the ability to test the 2-pair industry standard (1/2-3/6). The tester is equipped with a tone generator and identifies, locates cables in conjunction with a compatible inductive receiver (option R180001).