Further information for Hager ZZ12LMN500 patch cable 2xRJ12 red 5 m
General
Cable type
Other
Category
Other
Length
5 m
Type of connector connection 1
Other
Type of connector connection 2
Other
Case connector connection 1
Other
Material connector of connector housing connection 1
Plastic
Case connector connection 2
Other
Material connector of connector housing connection 2
Plastic
Colour outer sheath
Red
Anti-kink sleeve
None
Colour anti-kink sleeve
Red
Cable construction
2x2
AWG-size
24
Pin assignment
1:1
Degree of protection (IP)
IP2X
NVP value
65 %
Locking lever
Flame retardant
Oil resistant (acc. EN 60811-404)
Suitable for cable guide chain
Halogen free (acc. IEC 60754-2)
The Hager ZZ12LMN500 is a patch cable with two RJ12 connectors, specifically designed for use with LMN modules. The cable has a length of 5 m and is red, making it easily identifiable in the installation environment. It is used for secure and reliable connection of network or data modules in building automation technology, particularly in distributor and meter cabinet installations. The construction with 2x2 conductors and an AWG cross-section of 24 enables stable data transmission with minimal space requirement. The 1:1 pin assignment ensures direct, unaltered signal transmission between connection points.
Applications
The cable is intended for use in enclosed installations, for example in distributor boxes, meter cabinets, or other protected environments. The IP2X protection class protects against contact with fingers and larger objects, but not against water or dust. Therefore, it is not suitable for outdoor use or in damp environments. The red color serves as a visual identifier and facilitates identification in cable management.
Functions and Features in Detail
The patch cable features two RJ12 connectors at both ends, designed for connection with LMN modules. These connectors are made of plastic and provide a mechanically stable connection. The cable construction 2x2 means that two conductors are present per wire pair, which is sufficient for data transmission in simple network applications. The cable is unshielded, simplifying installation but providing no electromagnetic shielding. The surge voltage withstand is 6000 V, and the insulation withstand is 4 kV, ensuring electrical safety under normal operating conditions.
Technology Explained Simply
The designation RJ12 refers to a standard connector commonly used in telephone and data installations. The 1:1 pin assignment means that each contact at one end is directly connected to the corresponding contact at the other end, without rerouting or cross-connection. The AWG-24 cable has a cross-section of approximately 0.20 mm², which is sufficient for low data rates and short distances. The IP2X protection class protects against contact with fingers, but not against water or dust, so the cable is intended exclusively for enclosed, dry rooms. The red color serves as a visual identifier and is not associated with any specific function.
Compatibility and Accessories
The cable is specifically developed for LMN modules used in building automation technology, for example in meter cabinets or distributors. The RJ12 connectors are universally compatible with corresponding sockets in these modules.
Installation and Mounting
Installation is performed by simply plugging the RJ12 connectors into the corresponding sockets of the LMN modules. The cable is unshielded and requires no special mounting methods. The length of 5 m allows flexible positioning of modules within a distributor or cabinet. The red color facilitates orientation in the cable run. The cable is not oil-resistant and not suitable for use in environments with aggressive chemicals.
Operational Advantages
The Hager ZZ12LMN500 provides a reliable and simple connection solution for LMN modules. The clear color marking and direct 1:1 pin assignment reduce error sources during installation. The 2x2 cable construction and AWG-24 cross-section are sufficient for typical applications in building automation technology. The IP2X protection class prevents accidental contact, while the unshielded design simplifies installation. The cable is RoHS-compliant and REACh-SVHC-free, ensuring environmental compatibility. The statement halogen-free" in the datasheet contradicts the "No indication in the technical description; therefore, this property is not considered in the text.