Further information for Hager WNC036 key switch 1-pole grey
General
Assembly arrangement
Basic element with complete housing
Model
1-pole switch
Number of poles
2
Method of operation
Key
Mounting method
Surface mounted (plaster)
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Matt
Type of fastening
Mounting with screw
Colour
Grey
RAL-number (akin)
7011
Suitable for degree of protection (IP)
IP55
Rated current
10 A
Nominal voltage
240
Number of buttons
0
Number of modules (module system)
2
Min. depth of built-in installation box
0 mm
Built-in depth
32
Built-in diameter
0 mm
Built-in height
78 mm
Built-in width
76 mm
Connection type
Screwed terminal
Depth of device
89.9
Height of device
78
Width of device
76 mm
Mechanical controllable
Electronic controllable
Halogen free
Transparent
Label space/information surface
For awnings
For roller blinds
IFTTT support available
The Hager key switch WNC036 is a surface-mounted device for mechanical control of roller shutters, with the function limited to operation via a removable key. The device is designed as a single-pole switch and features an IP55 protection rating, making it suitable for use in indoor environments as well as in slightly damp or dusty conditions. The surface is matte and grey, corresponding to RAL number 7011, allowing it to blend visually into standard installations. The housing is made of halogen-free thermoplastic, suitable for use in electrical installations.
Key switch
The switch is equipped with a removable key that can be removed in the 0 position. This enables secure disconnection and prevents unintended operation. Operation is performed via three positions, marked with the labels '1', '0', and '2'. These positions are used to control roller shutters, with the exact assignment of positions to functions (e.g. Up, Stop, Down) determined by the specific application. The switching function is purely mechanical and does not require electronic control.
Applications
The switch is specifically designed for controlling roller shutters and is suitable for installations in residential and commercial buildings. The IP55 protection rating protects against dust and splashing water, making it suitable for outdoor use as well, provided the mounting conditions are appropriate. The operating temperature range is between -15 °C and +30 °C, allowing use in climatically moderate regions. Mounting is done surface-mounted using screw fastening, with a mounting width of 76 mm and mounting height of 78 mm. The mounting depth is 32 mm, allowing the device to be installed in standard installation boxes.
Functions and equipment in detail
The device features a screw terminal as the connection method, ensuring a secure and durable connection to the wiring system. The rated voltage is 240 V, and the rated current is 10 A, sufficient for controlling roller shutter drives. The frequency range is between 50 and 60 Hz, enabling use in European and international power networks. The surface is untreated and matte, resulting in a robust and easy-to-maintain surface. The device is made of halogen-free thermoplastic, increasing environmental compatibility and reducing fire hazard.
Technology explained simply
The IP55 protection rating means the device is protected against dust and splashing water, making it suitable for indoor and outdoor use, provided there is no direct water exposure. Mechanical operation is performed via a key that can be removed in the 0 position to ensure disconnection. The switching function is purely mechanical, without electronic control, which increases reliability and simplifies maintenance. The screw terminals ensure a secure and durable connection, required for electrical installation.
Compatibility and accessories
The switch is specifically designed for controlling roller shutters and can be integrated into existing roller shutter systems. Mounting is surface-mounted, with dimensions (76 mm width, 78 mm height) matched to standard installation boxes. Use in combination with other Hager products is possible, provided electrical and mechanical requirements are compatible.
Mounting and installation
Mounting is done surface-mounted using screw fastening. The mounting width is 76 mm, mounting height is 78 mm, and mounting depth is 32 mm. The device is designed for use in standard installation boxes. The connection method is a screw terminal, ensuring a secure and durable connection to the wiring system. Installation requires no special tools, except a screwdriver for fastening.
Advantages in operation
The switch provides secure and reliable control of roller shutters through mechanical operation. The IP55 protection rating allows use in damp or dusty environments. The removable key operation prevents unintended use and enables secure disconnection. The use of halogen-free thermoplastic increases environmental compatibility and reduces fire hazard. The screw terminals ensure a secure and durable connection, required for electrical installation.