Further information for Hager WLS1800WG socket outlet with protective earth pin
General
Model
Earthing pin
Number of active Pins (round)
2
Number of active Pins (flat)
0
Number of modules (module system)
1
Number of socket outlets switchable
0
Number of phases
1
Imprint/indication
None
Connection type
Screwed terminal
Colour
White
RAL-number (akin)
9010
Special power supply
None
Mounting method
Flush mounted (plaster)
Type of fastening
Mounting with claw and screw
Material
Plastic
Material quality
Thermoplastic
Surface protection
Untreated
Surface finishing
Glossy
Nominal current
16 A
Nominal voltage
250 V
Frequency
60 Hz
Rated fault current
0 mA
Suitable for degree of protection (IP)
IP20
Impact strength
IK05
Width of device
71 mm
Height of device
71 mm
Depth of device
40.9 mm
Min. depth of built-in installation box
40 mm
Assembly arrangement
Basic element with central cover plate
Mounting direction
Horizontal and vertical
Number of ports USB-A
0
Number of socket outlets
1
With signal lamp
With hinged lid
With child-protection
Label space/information surface
Transparent
Lockable
Eject-mechanism
Insulated mounting
With function lighting
With orientation lighting
Over voltage protection
Fault current protection
With miniature fuse
Halogen free
Antibacterial treatment
With on/off switch
With loop through function
Rotated central insert
Concurrently switching N-neutral
IFTTT support available
The Hager socket outlet WLS1800WG is a flush-mounted socket module from the R.Classic series, finished in polar white glossy. It features a protective earth pin and is equipped with enhanced shock protection (BS), ensuring safe use even in case of accidental contact. The device is designed for mounting in flush-mounted boxes and is suitable for standard installations in residential and commercial buildings. The socket outlet is designed as a basic element with a central cover plate, enabling flexible mounting in both horizontal and vertical orientations.
Applications
This socket outlet is intended for indoor use, where electrical supply for devices with a rated current up to 16 A and a rated voltage of 250 V is required. The protection class IP20 safeguards against contact with fingers and larger objects, but does not protect against water or dust. The impact resistance IK05 provides protection against mechanical impacts during normal operation. The operating temperature ranges from -5 °C to +35 °C, allowing use in air-conditioned rooms and under normal ambient conditions.
Functions and Equipment in Detail
The socket outlet features a protective earth pin and two active round contacts. Connections are made via screw terminals, designed for conductor cross-sections from 1.5 to 2.5 mm². Mounting is achieved using claw and screw fastening, with a minimum depth of the device box of 40 mm. The device dimensions are 71 mm (height), 71 mm (width), and 40.9 mm (depth). The socket outlet is not equipped with a signal lamp, orientation lighting, function lighting, fine fuse, residual current protection, or overvoltage protection. There is no labeling surface, no text fields, and no integrated pass-through function. The socket outlet is not lockable and does not feature an ejection mechanism.
Technology Explained Simply
The enhanced shock protection (BS) ensures that the conductive parts of the socket outlet are not directly accessible, increasing safety. The screw terminals allow for a secure and durable connection of the conductors. The use of thermoplastic as the material ensures high mechanical stability and heat resistance. The polar white color (similar to RAL 9010) and glossy surface provide a uniform appearance that integrates well into modern interior designs. The socket outlet is halogen-free and complies with RoHS and REACh-SVHC standards, ensuring environmental compatibility.
Compatibility and Accessories
The socket outlet is designed for the R.Classic series and can be combined with other modules from this series. The flexible mounting in 45° increments allows adaptation to various installation situations. The socket outlet does not feature additional functions such as USB connections, switching functions, or integrated fuses.
Mounting and Installation
Mounting is performed in flush-mounted boxes with a minimum depth of 40 mm. Fixing is done via claw and screw fastening, allowing the socket outlet to be mounted both horizontally and vertically. Pass-through wiring is possible, enabling flexible cabling in the installation. The socket outlet is not suitable for outdoor use, as it is not waterproof.
Operational Advantages
The socket outlet provides a safe and reliable power supply for electrical devices. The enhanced shock protection and screw terminals ensure a secure connection. The use of halogen-free thermoplastic and compliance with RoHS and REACh-SVHC contribute to environmental compatibility. The glossy surface in polar white provides an attractive appearance that fits well in modern interiors. The flexible mounting in 45° increments allows for adaptable installation at various locations.
Functions
The socket outlet features a protective earth pin and two active round contacts. Connections are made via screw terminals, designed for conductor cross-sections from 1.5 to 2.5 mm². Mounting is achieved using claw and screw fastening, with a minimum depth of the device box of 40 mm. The device dimensions are 71 mm (height), 71 mm (width), and 40.9 mm (depth). The socket outlet is not equipped with a signal lamp, orientation lighting, function lighting, fine fuse, residual current protection, or overvoltage protection. There is no labeling surface, no text fields, and no integrated pass-through function. The socket outlet is not lockable and does not feature an ejection mechanism.
Technology Explained Simply
The enhanced shock protection (BS) ensures that the conductive parts of the socket outlet are not directly accessible, increasing safety. The screw terminals allow for a secure and durable connection of the conductors. The use of thermoplastic as the material ensures high mechanical stability and heat resistance. The polar white color (similar to RAL 9010) and glossy surface provide a uniform appearance that integrates well into modern interior designs. The socket outlet is halogen-free and complies with RoHS and REACh-SVHC standards, ensuring environmental compatibility.
Compatibility and Accessories
The socket outlet is designed for the R.Classic series and can be combined with other modules from this series. The flexible mounting in 45° increments allows adaptation to various installation situations. The socket outlet does not feature additional functions such as USB connections, switching functions, or integrated fuses.
Mounting and Installation
Mounting is performed in flush-mounted boxes with a minimum depth of 40 mm. Fixing is done via claw and screw fastening, allowing the socket outlet to be mounted both horizontally and vertically. Pass-through wiring is possible, enabling flexible cabling in the installation. The socket outlet is not suitable for outdoor use, as it is not waterproof.
Operational Advantages
The socket outlet provides a safe and reliable power supply for electrical devices. The enhanced shock protection and screw terminals ensure a secure connection. The use of halogen-free thermoplastic and compliance with RoHS and REACh-SVHC contribute to environmental compatibility. The glossy surface in polar white provides an attractive appearance that fits well in modern interiors. The flexible mounting in 45° increments allows for adaptable installation at various locations.