General
Number of switches	1
Max. rated operation voltage Ue AC	415 V
Rated operating voltage	415 V
Rated permanent current Iu	125 A
Rated permanent current at AC-23, 400 V	125 A
Rated permanent current at AC-21, 400 V	125 A
Rated short-time withstand current lcw	12 kA
Rated operation power at AC-23, 400 V	56 kW
Switching power at 400 V	82 kW
Conditioned rated short-circuit current Iq	100 kA
Number of poles	4
Number of auxiliary contacts as normally closed contact	0
Number of auxiliary contacts as normally open contact	0
Number of auxiliary contacts as change-over contact	0
Device construction	Built-in device fixed built-in technique
Colour control element	Other
Type of control element	Other
Type of electrical connection of main circuit	Cable clamp
Degree of protection (IP), front side	IP00
Degree of protection (NEMA)	Other
Version as main switch
Version as maintenance-/service switch
Version as safety switch
Version as emergency stop installation
Version as reversing switch
Motor drive optional
Motor drive integrated
Voltage release optional
Suitable for front mounting 4-hole
Suitable for front mounting centre
Suitable for distribution board installation
Suitable for intermediate mounting
Interlockable
Floor mounting

Load changeover switch with motor drive 4-pole 125A. Load changeover switch with motor drive in accordance with DIN EN 60947-3 and DIN EN 60947-6-1 for remote switching of 2 low-voltage circuits with safety separation for installation in distribution boards. The changeover switch consists of two load-break switches arranged one above the other with locking and remote drive.
Function:

• 3 stable switching positions (I-0-II) and automatic switching under load from one position to the other safety separation with switch position indicator
• manual emergency switch handle
• generously dimensioned connection rails that enable the use of connecting rails.
With standby relay with constant monitoring of the availability of the device, integrated auxiliary switch (SÖ) for each switching point and automatic or manual switching selectable.
Note: Manual locking with a padlock is possible.